Optimization of production conditions for activated carbons from rice husk by potassium carbonate using response surface methodology

被引：1

作者：

Meng, Mian-Wu ^{[1
]}

Qi, Cong-Liang ^{[1
]}

Liu, Qing-Ye ^{[2
]}

Lv, Liang ^{[1
]}

Ai, Hao ^{[1
]}

Zhou, Zhen-Ming ^{[2
]}

Zhang, Tao ^{[1
]}

Jiang, Hua ^{[1
]}

Kang, Cai-Yan ^{[2
]}

Huang, Si-Yu ^{[2
]}

机构：

[1] College of Environment and Resource, Guangxi Normal University, Guilin

[2] Key Laboratory of Ecology of Rare and Endangered Species and Environmental Conservation, Ministry of Education of China

来源：

Advanced Materials Research | 2014年 / 1053卷

关键词：

Activated carbon; CCD; Rice husk; RSM;

D O I：

10.4028/www.scientific.net/AMR.1053.303

中图分类号：

学科分类号：

摘要：

A three-factor-three-level experiment was developed by the central composite design (CCD) and Response surface methodology to discuss the effects of concentration of K2CO3, activation temperature and time on the adsorption capacity of the activated carbon (AC) derived from the rice husk and to identify the key preparation parameters. The performance of the AC was characterized by nitrogen adsorption isotherm as Brunauer–Emmett–Teller (BET) and scanning electron microscope (SEM), respectively. The optimal parameters were obtained: Rice husk was soaked in K2CO3 solution (2.32 mol/L) with an impregnation ratio (rice husk: K2CO3=1:3) (wt. %), activated at 1239 K for 0.48 h. The results showed that iodine adsorption capacity of the AC was 1268.52 mg/g, the error between the models predicted (1356.98 mg/g) was only 6.2%. The AC has a large apparent surface area (SBET = 1312 m2/g), total pore volume (0.78 cm3/g) and average pore diameter (11.92 Å). © (2014) Trans Tech Publications, Switzerland.

引用

页码：303 / 310

页数：7

共 13 条

[1]

Tongpoothorn W., Sriuttha M., Homchan P., Et al., Preparation of activated carbon derived from Jatropha curcas fruit shell by simple thermo-chemical activation and characterization of their physico-chemical properties [J], Chemical Engineering Research and Design, 89, 3, pp. 335-340, (2011)

[2]

Liu B.G., Peng J.H., Srinivasakannan C., Et al., Coupling and absorbing behavior of microwave irradiation on the Co(C(2)O(4))center dot 2H(2)O:Co(3)O(4) system[J], Bioresource Technology, 42, 1, pp. 92-96, (2011)

[3]

Purnomo C.W., Salim C., Hinode H., Effect of the activation method on the properties and adsorption behavior of bagasse fly ash-based activated carbon[J], Fuel Processing Technology, 102, pp. 132-139, (2012)

[4]

Ould-Idriss A., Stitou M., Cuerda-Correa E.M., Et al., Preparation of activated carbons from olive-tree wood revisited. I. Chemical activation with H3PO4[J], Fuel Processing Technology, 92, 2, pp. 261-265, (2011)

[5]

Auta M., Hameed B.H., Preparation of waste tea activated carbon using potassium acetate as an activating agent for adsorption of Acid Blue 25 dye[J], Chemical Engineering Journal, 171, 2, pp. 502-509, (2011)

[6]

Li T.H., Zhu L., Wang X.X., Et al., Preparation of activated carbons by microwave heating KOH activation[J], Applied Surface Science, 254, 2, pp. 506-512, (2007)

[7]

Adinata D., Daud W., Aroua M.K., Preparation and characterization of activated carbon from palm shell by chemical activation with K2CO3[J], Bioresource Technology, 98, 1, pp. 145-149, (2007)

[8]

Foo K.Y., Hameed B.H., Utilization of rice husks as a feedstock for preparation of activated carbon by microwave induced KOH and K2CO3 activation[J], Bioresource Technology, 102, pp. 9814-9817, (2011)

[9]

Alam M.Z., Muyibi S.A., Toramae J., Statistical optimization of adsorption processes for removal of 2,4-dichlorophenol by activated carbon derived from oil palm empty fruit bunches[J], Journal of Environmental Sciences, 19, 6, pp. 674-677, (2007)

[10]

Karacana F., Ozdena U., Karacanb S., Optimization of manufacturing conditions for activated carbon from Turkish lignite by chemical activation using response surface methodology[J], Applied Thermal Engineering, 27, 7, pp. 1212-1218, (2007)

← 1 2 →