The interaction of ductile tearing and creep crack growth

被引：1
作者：
Ainsworth, R.A. [1 ]
Booth, S.E. [2 ]
机构：
[1] University of Manchester, Sackville Street, Manchester
[2] EDF Energy Generation, Barnwood Gloucester
来源：
Strength, Fracture and Complexity | 2015年 / 9卷 / 01期
关键词：
crack growth; creep; Ductile tearing;
D O I：
10.3233/SFC-150178
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
This paper proposes that the combined effects of ductile tearing and creep crack growth may be assessed by simple linear addition of the separately assessed crack growth components. Some limited comparisons with experimental data are made using results from compact tension tests on austenitic Type 316H stainless steel. It is demonstrated that experimental creep crack growth data can be misinterpreted if the data are not corrected for both ductile tearing and plastic displacement. However, these two effects tend to balance each other so that it is preferable to correct for neither rather than for only one factor. Alternatively, it is shown that the time dependent failure assessment diagram approach for creep crack growth can automatically handle tearing-creep interactions by a suitable definition of toughness which does not separate tearing from creep crack growth or plastic displacement from creep displacement. © 2015 - IOS Press and the authors. All rights reserved.
引用
收藏
页码：43 / 59
页数：16
相关论文
共 31 条
  • [21] Ohji K., Ogura K., Kubo S., Stress-strain fields and modified J -integral in the vicinity of the crack tip under transient creep conditions, Japan Society of Mechanical Engineering, 790, 13, pp. 18-20, (1979)
  • [22] Riedel H., Rice J.R., Tensile cracks in creeping solids, Fracture Mechanics: Twelfth Conference, ASTM STP 700, pp. 112-130, (1980)
  • [23] Ainsworth R.A., Dean D.W., Budden P.J., Creep crack growth under complex loading, J. ASTM International, 8, 5, (2011)
  • [24] Ainsworth R.A., The use of a failure assessment diagram for initiation and propagation of defects at high temperatures, Fatigue Fract. Eng. Mater. Struct., 16, pp. 1091-1108, (1993)
  • [25] Ainsworth R.A., Hooton D.G., Green D., Further developments of an R6 approach for the assessment of creep crack incubation, ASME PVP Conference, 315, pp. 39-44, (1995)
  • [26] Dogan B., Ceyhan U., Korous J., Mller F., Ainsworth R.A., Sources of scatter in creep-fatigue crack growth testing and their impact on plant assessments, Paper FITNET-06-10, Proc. FITNET 2006, Int. Conf. Fitness-for-Service, pp. 271-280, (2006)
  • [27] Ainsworth R.A., The assessment of defects in structures of strain hardening material, Eng. Fract. Mech., 19, pp. 633-642, (1984)
  • [28] Gladwin D.N., Private Communication, (1997)
  • [29] Booth S.E., Hinkley point b/hunterston b: Revised integrity assessment for reheater outlet penetration shop weld 1, Nuclear Electric Report EPD/HPB/REP/0152/96, (1997)
  • [30] Standard Test Method for Measurement of Creep Crack Growth Rates in Metals, ASTM e, pp. 1457-1507, (2007)
1234