Effect of CoO on the formation of mullite ceramics from Diphasic Al2O3-SiO2 Gel

被引：0

作者：

Roy J. ^{[1
]}

Bandyopadhyay N. ^{[2
]}

Das S. ^{[3
]}

Maitra S. ^{[4
]}

机构：

[1] Camellia Institute of Technology, Badu, Madhyamgram

[2] Govt. College of Engineering and Ceramic Technology, Kolkata-700010, 73, A. C. Banerjee Lane

[3] Mechanical and Metallurgical Engineering, Florida International University

[4] Universiti Teknologi PETRONAS, Tronoh-31750, Perak

来源：

Journal of Engineering Science and Technology Review | 2010年 / 3卷 / 01期

关键词：

CoO additive; Di-phasic gel; Mechanical properties; Microstructure; Mullite;

D O I：

10.25103/jestr.031.23

中图分类号：

学科分类号：

摘要：

In this work the effect of CoO additive on the formation of mullite from Al2O3-SiO2 diphasic gel has been studied. The diphasic gel precursor for mullite was synthesized by sol-gel route following aqueous phase colloidal interaction of aluminium hydroxide and silicic acid. The precursor gel powder was thoroughly characterized by chemical analysis, measurement of surface area, bulk density and also by FTIR spectroscopic studies. The gel powder was compacted with the CoO additives in different ratios and sintered at three different elevated temperatures. Microstructure of the sintered compacts was analyzed from SEM studies and phase analyses were carried out from XRD studies. It has been observed that the morphology of the mullite crystals changed significantly in the presence of the additives. As a result of the inclusion of additive maximum expansion in the b-axis of the mullite crystal took place. With the addition of 3% additive more than 14% mullite formation occurred after sintering. A significant improvement in the formation of mullite in the sintered masses was also observed in the presence of CoO additive. More than 10% improvement in density as well as flexural strength and about 5% improvement in fracture toughness of the sintered compacts were observed in the presence of the CoO additive. © 2010 Kavala Institute of Technology.

引用

页码：136 / 141

页数：5

共 37 条

[1] Kollenberg W., Schneider H., J. Am. Ceram. Soc., 72, (1989)
[2] Hynes A.P., Doremus R.H., J. Am. Ceram. Soc., 74, (1991)
[3] Aksay A., Dabbs D.M., Sarikaya M., J. Am. Ceram. Soc., 74, (1991)
[4] Schneider H., Eberhard E., J. Am. Ceram. Soc., 73, (1990)
[5] Kanka B., Schneider H., J. Mater. Sci., 29, (1994)
[6] Sarikaya M., Aksay I.A., J. Am. Ceram. Soc., 70, (1987)
[7] Cameron W.E., Am Miner., 62, (1977)
[8] Duval D.J., Risbud S.H., Shackelford J.F., Ceramics and Glass Materials: Structure, Properties and Processing, (2008)
[9] Yoldas B.E., Am. Ceram. Soc. Bull., 59, (1980)
[10] Hoffman W., Roy R., Komarneni S., J. Am. Ceram. Soc., 69, (1984)

← 1 2 3 4 →