The Use of Grading in Nb3Sn High-Field Block-Coil Dipoles

被引：3

作者：

Rochepault E. ^{[1
,2
]}

Felice H. ^{[1
]}

Ferracin P. ^{[3
]}

Bermudez S.I. ^{[2
]}

Lorin C. ^{[1
]}

机构：

[1] IRFU, CEA, Université Paris-Saclay, Paris

[2] European Organization for Nuclear Research, Geneva

[3] Lawrence Berkeley National Laboratory, Berkeley, 94720, CA

来源：

IEEE Transactions on Applied Superconductivity | 2021年 / 31卷 / 04期

关键词：

Block-coils; future circular collider (FCC); grading; high-field dipoles; magnetic analysis; Nb[!sub]3[!/sub]Sn;

D O I：

10.1109/TASC.2021.3061246

中图分类号：

学科分类号：

摘要：

High-field Nb3Sn dipoles generating more than 15 T are strongly required, whether it is for the future circular collider studies (CERN 16 T Development Program, CEA-CERN demonstrator) or for test stations (FRESCA2, HEPDipo). The use of magnets graded with different cables now becomes unavoidable to allow for more compact and cost-effective designs. This article presents a 2-D parametric study, which explores possible options for an optimal grading. The study uses analytical formulas for current sources to allow for fast and accurate parametric studies. Block coils are considered, using different cable sizes, and therefore, different current densities. Various parameters are also explored, such as cable combinations, current density ratios, conductor performance, and position of the blocks. The article shows in particular what are the optimal grading factors and amount of conductor required to reach a given bore field, considering margins on the load line, and limitations in current density for quench protection. © 2002-2011 IEEE.

引用

页码：1 / 10

页数：9

共 25 条

[11]

Todesco E., Bottura L., De Rijk G., Rossi L., Dipoles for high-energy LHC, IEEE Trans. Appl. Supercond., 24, 3, pp. 1-6, (2014)

[12]

Ferracin P., Et al., Recent test results of the high field Nb3Sn dipole magnet HD2, IEEE Trans. Appl. Supercond., 20, 3, pp. 292-295, (2010)

[13]

Sabbi G., Et al., Performance characteristics of Nb3Sn block-coil dipoles for a 100 TeV hadron collider, IEEE Trans. Appl. Supercond., 25, 3, (2015)

[14]

Lorin C., Durante D., Segreti M., EuroCirCol 16 T block-coils dipole option for the future circular collider, IEEE Trans. Appl. Supercond., 27, 4, (2017)

[15]

Lorin C., Et al., Design of a Nb3Sn 16 T block dipole for the future circular collider, IEEE Trans. Appl. Supercond., 28, 3, (2018)

[16]

Segreti M., Et al., 2D and 3D design of the block-coil dipole option for the future circular collider, IEEE Trans. Appl. Supercond., 29, 5, pp. 1-4, (2019)

[17]

Bermudez S.I., Ortwein R., Perez J.C., Rochepault E., Design of ERMC and RMM, the base of the Nb3Sn 16 T magnet development at CERN, IEEE Trans. Appl. Supercond., 27, 4, (2017)

[18]

Felice H., Et al., F2D2: A block-coil short-model dipole toward FCC, IEEE Trans. Appl. Supercond., 29, 5, (2019)

[19]

Rochepault E., Et al., 3D conceptual design of F2D2, the FCC blockcoil short model dipole, IEEE Trans. Appl. Supercond., 30, 4, (2020)

[20]

Portone A., Et al., The EDIPO project: Status and outlook, IEEE Trans. Appl. Supercond., 22, 3, (2012)

← 1 2 3 →