Error analysis of star image coordinate based on digital zenith camera

被引：0

作者：

Yang S. ^{[1
]}

Zhou Z. ^{[1
]}

Liu X. ^{[1
]}

Zhang X. ^{[1
]}

机构：

[1] State Key Discipline Laboratory of Armament Launch Theory and Technology, Rocket Force University of Engineering, Xi'an

来源：

Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2018年 / 47卷 / 07期

关键词：

Digital zenith camera; Error analysis; Star image coordinates;

D O I：

10.3788/IRLA201847.0726002

中图分类号：

学科分类号：

摘要：

The accuracy of the star image coordinates is closely related to the positioning accuracy of the digital zenith camera. On the basis of the principle of digital zenith camera imaging, the star image coordinate expression was deduced strictly. The error equations of the image coordinates under four error factors and composite error factor were deduced based on the star image coordinate expression. The analysis results showed that the errors were independent of each other. Star map data was obtained through the simulation under four error factors and composite error factor. The simulation results show that: The influence of the image coordinates of each star point caused by the focal distance error and the transposition error is different. Compared to average value of the coordinate change values of Δx and Δy, the maximum fluctuation values of Δx and Δy caused by the focal distance error were about 2.38 pixel and 3.04 pixel. The maximum fluctuation values of Δx and Δy caused by the transposition error were about 1.06 pixel and 1.41 pixel. The error of the optical axis tilt and the main point offset made the change of the star image coordinates as whole migration. In addition, a method for solving the error parameters was proposed. The calculated error parameters were used to compensate the star image coordinates. The longitude accuracy of the digital zenith camera was improved by about 1.98 m, and the latitude accuracy was improved by about 1.65 m. © 2018, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.

引用

共 12 条

[1]

Hirt C., Burki B., Guillaume S., Et al., Digital zenith camerasstate-of-the-art astrogeodetic technology for Australian Geodesy, Proceedings FIG International Congress, pp. 1-16, (2010)

[2]

Hirt C., The digital zenith camera TZK2-D-a modern highprecision geodetic instrument for automatic geographic positioning in real-time, Astronomical Data Analysis Software and Systems XII ASP Conference Series, 265, 1, pp. 156-159, (2003)

[3]

Tian L., Guo Y., Han Y., Et al., Digital zenith telescope prototype of China, Chinese Science Bulletin, 59, 12, pp. 1094-1099, (2014)

[4]

Wang B., Tian L., Wang Z., Et al., The image and data processing in digital zenith camera, China Science Bulletin, 59, 12, pp. 1100-1107, (2014)

[5]

Hirt C., Seeber G., Accuracy analysis of vertical deflection data observed with the hannover digital zenith camera system TZK2-D, Journal of Geodesy, 82, 6, pp. 347-356, (2008)

[6]

Liu X., Zhang Z., Yang S., Et al., Time calibration method based on digital zenith camera, Infrared and Laser Engineering, 46, 10, (2017)

[7]

Zhai G., Ai G., Digital zenith camera astronomical positioning measurement of project implementatiion, Journal of Geomatics Science and Technology, 31, 3, pp. 232-235, (2014)

[8]

Zeng Z., Hu X., Gao L., Effoct of digital zenith camera aixs error on measurement precision of vertical deflection and its correction, Optics and Precision Engineering, 12, 1, pp. 6-10, (2004)

[9]

Zeng Z., Hu X., Gu L., Et al., Image processing of digital zenith camera, Acta Photonica Sinica, 33, 2, pp. 248-251, (2004)

[10]

Zhang Z., Liu X., Zhou Z., Et al., Infiuence of turntable error on axis error in digital zenith camera, Optics and Precision Engineering, 23, 11, pp. 3090-3096, (2015)

← 1 2 →