Research on fractal model of tangential contact stiffness between cylindrical surfaces considering friction factors

被引：1
作者：
Chen Q. [1 ]
Zhang Z. [1 ]
Liu P. [1 ]
Huang S. [1 ]
Ma Y. [1 ]
机构：
[1] School of Mechanical Engineering, Hefei University of Technology, Hefei
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2016年 / 52卷 / 23期
关键词：
Cylindrical surfaces; Fractal theory; Friction; Tangential contact stiffness;
D O I：
10.3901/JME.2016.23.168
中图分类号：
学科分类号：
摘要：
In order to precisely calculate tangential contact stiffness (TCS) between cylindrical surfaces, this paper presents the establishment of fractal model for TCS calculation between cylinders considering friction factors. This model is obtained by introducing the equation of critical contact area of elastoplastic deformation with friction and employing the basic theory of TCS, based on the fractal contact model of two cylinders' surfaces, and by employing the Matlab to simulate the model, the changing law of TCS affected by different parameters (such as: friction coefficient, fractal dimension, roughness amplitude, material propertied parameters and curvature radius of cylinders) and contact type is investigated. The numerical results are as follows: the relationship between TCS and normal load is direct ratio, which appears exponential and linear rule respectively with variation of fractal dimension. TCS is inverse proportional to friction coefficient. Effect of material propertied parameters on TCS changes with size of fractal dimension as well as the value itself. The correlations between fractal dimension and TCS, roughness amplitude and TCS are direct or inverse proportion depending on the value of fractal dimension and material propertied parameters. Furthermore, TCS of inner contact is bigger than that of outer contact; TCS increases with curvature radius of cylinders. The theory here helps to analyze the dynamic characteristics between high-pair's joint surfaces in the future. © 2016 Journal of Mechanical Engineering.
引用
收藏
页码：168 / 175
页数：7
相关论文
共 18 条
[1]  
Zhang X., Wen S., A fractal model of tangential contact stiffness of joint surfaces based on the contact fractal theory, Transactions of the Chinese Society for Agricultural Machinery, 33, 3, pp. 91-93, (2002)
[2]  
Zhang X., Wen S., Xu G., Et al., Fractal model of the tangential contact stiffness of machined surfaces in contact, Chinese Journal of Applied Mechanics, 20, 1, pp. 70-73, (2003)
[3]  
Wen S., Zhang X., Wen X., Et al., Fractal model of tangential contact stiffness of joint interfaces and its simulation, Transactions of the Chinese Society for Agricultural Machinery, 40, 12, pp. 223-227, (2009)
[4]  
Tian H., Zhao C., Fang Z., Et al., Improved model of tangential stiffness for joint interface using anisotropic fractal theory, Transactions of the Chinese Society for Agricultural Machinery, 44, 3, pp. 257-266, (2013)
[5]  
Tian H., Chen C., Fang Z., Et al., Tangential stiffness model for joint interface adopting the revised fractal geometric theory, Journal of Xi'an Jiaotong University, 48, 7, pp. 46-52, (2014)
[6]  
Huang K., Zhao H., Chen Q., Research of fractal contact model on contact carrying capacity of two cylinders' surface, Tribology, 28, 6, pp. 529-533, (2008)
[7]  
Zhao H., Chen Q., Huang K., Analysis of two ball's surface contact stress based on fractal theory, 7th International Forum on Advanced Material Science and Technology, pp. 619-627, (2011)
[8]  
Zhao H., Chen Q., Huang K., Fractal model of normal contact stiffness between two cylinders' joint interfaces, Journal of Mechanical Engineering, 47, 7, pp. 53-58, (2011)
[9]  
Chen Q., Zhao H., Huang K., Fractal model of tangential contact stiffness between gears's joint surfaces, Transactions of the Chinese Society for Agricultural Machinery, 42, 2, pp. 203-206, (2011)
[10]  
Chen Q., Huang K., Zhao H., Et al., Simulation and analysis of the model of calculating contact tangential stiffness between cylinders' joint interfaces by MATLAB, Applied Mechanics and Materials, 190-191, pp. 177-181, (2012)
12