High-precision measurement method and device on diffraction efficiency of Acousto-Optic Tunable Filter based on double-optical-path and cross-references

被引：0

作者：

Qin X. ^{[1
]}

Ji Z. ^{[1
]}

Xu Y. ^{[1
]}

Shu R. ^{[1
]}

机构：

[1] Key Laboratory of Space Active Opto-Electronics Technology, Chinese Academy of Sciences, Shanghai Institute of Technical Physics, Shanghai

来源：

Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2017年 / 46卷 / 04期

关键词：

AOTF; Diffraction efficiency; Double-optical-path and cross-references; High-precision; Measuring method;

D O I：

10.3788/IRLA201746.0417001

中图分类号：

学科分类号：

摘要：

To adapt to the further requirement of measurement accuracy of slight photo electric signal in the field of modern photoelectric detection technology, high-precision measurement method of diffraction efficiency of Acousto-Optic Tunable Filter (AOTF) was proposed and verified. Light path switchable devices was used to achieve cross-reference detection, reducing the effect of light source instability, nonuniform response of the detector and photoelectric-jamming, which improved the accuracy of measurement effectively. Firstly, the principle of high-precision measurement of diffraction efficiency of AOTF based on double-optical-path and cross-references was introduced concretely in this paper. Experiments were performed to testify the accuracy of this method. Experimental results indicate that the diffraction efficiency measurement accuracy is improved 50 percent averagely by using cross-references approach. The proposed method has a significance to reduce the influence of source instability and response difference in detectors, and improve high-precision measuring. Finally, the range of application and referential meaning of this method were also discussed and analyzed. © 2017, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.

引用

共 13 条

[1]

Rastogi P.K., Optical Measurement Techniques and Applications, (1997)

[2]

Zhang Y., Jin C., Ma D., Et al., Analysis of measuring errors for visible light phase-shifiting point diffraction interferometer, Infrared and Laser Engineering, 41, 5, pp. 1351-1356, (2012)

[3]

Ren K.G., Xu F., Development of a precise and in situ turbidity measurement system, AIP Conf Proc, 914, (2007)

[4]

Wen X., Lin L., Wu Y., A kind of method for measuring absorbance spectrum with dual beam light and one detector, Spectroscopy and Spectral Analysis, 18, 5, pp. 626-628, (1998)

[5]

He Z., Shu R., Wang J., Imaging spectrometer based on AOTF and its prospects in deep-space exploration application, SPIE, 8196, (2011)

[6]

He Z., Qin X., Xu Y., Et al., Staring acousto-optic spectral imaging technology with area FPA and discussion on its application of unmanned aerial vehicle (UAV) platforms, Infrared and Laser Engineering, 45, 2, pp. 3001-3007, (2016)

[7]

He Z.P., Wang B.Y., Visible and near-infrared imaging spectrometer and its preliminary results from the Chang'E 3 project, Review of Scientific Instruments, 85, (2014)

[8]

He Z., Wang B., Operating principles and detection characteristics of the Visible and Near-Infrared Imaging Spectrometer in the Chang'e-3, Research in Astronomy and Astrophysics, 14, 12, pp. 1567-1577, (2014)

[9]

Liu J., Ma Y., New hyperspectral imaging system based on AOTF, Infrared and Laser Engineering, 42, 11, pp. 3065-3069, (2013)

[10]

Liu S., Wang B., Xu R., Et al., Broad spectral range AOTF performance analysis system based on multi-band acquisition, Infrared and Laser Engineering, 44, 4, pp. 1343-1348, (2015)

← 1 2 →