Enhancement of Photoelectrocatalytic Degradation of Bisphenol A with Peroxymonosulfate Activated by a Co 3 O 4 /BiVO 4 Composite Photoanode

被引:1
作者
Li J. [1 ,2 ]
Wang Y. [2 ]
Zhang X.-F. [1 ]
Zhao X. [2 ]
机构
[1] School of Light Industry and Chemical Engineering, Dalian Polytechnic University, Dalian
[2] State Key Laboratory of Environmental Aquatic Chemistry, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing
来源
Zhao, Xu (zhaoxu@rcees.ac.cn) | 2018年 / Science Press卷 / 39期
关键词
Bisphenol A; BiVO [!sub]4[!/sub; Co [!sub]3[!/sub] O [!sub]4[!/sub] /BiVO [!sub]4[!/sub] photoanode; Peroxymonosulfate; Photoelectrocatalytic;
D O I
10.13227/j.hjkx.201711036
中图分类号
学科分类号
摘要
A nanostructured Co 3 O 4 /BiVO 4 composite photoanode was synthesized using a facile electrospinning method and applied to photoelectrochemical (PEC) degradation of bisphenol A (BPA) with the assistance of peroxymonosulfate (PMS). Results show that PMS obviously enhanced the photoelectrocatalytic degradation of BPA by the Co 3 O 4 /BiVO 4 composite photoanode. When at 0.25 V bias potential and visible light irradiation, with 2 mmol•L -1 PMS addition, 96% of BPA was removed within 2 h, and the corresponding kinetic constant was 0.471 4 min -1 . The effects of initial PMS concentration and bias potential on the BPA degradation were studied. Results show that BPA could be efficiently degraded at lower PMS concentrations and lower bias potentials. SO 4 •- and •OH were identified as the primary free radicals using an electron spin resonance spectrometer. Free radical quenching experiments were carried out, and the photogenerated hole, SO 4 •- , and •OH proved to be responsible for the BPA oxidation. There was no metal ion leaching detected in the solution after the reactions, which means the secondary pollution could be avoided. © 2018, Science Press. All right reserved.
引用
收藏
页码:3713 / 3718
页数:5
相关论文
共 24 条
[1]  
Zhao J., Wang Z.Y., White J.C., Et al., Graphene in the aquatic environment: Adsorption, dispersion, toxicity and transformation, Environmental Science & Technology, 48, 17, pp. 9995-10009, (2014)
[2]  
Kahrilas G.A., Blotevogel J., Stewart P.S., Et al., Biocides in hydraulic fracturing fluids: a critical review of their usage, mobility, degradation, and toxicity, Environmental Science & Technology, 49, 1, pp. 16-32, (2015)
[3]  
Bessegato G.G., Guaraldo T.T., de Brito J.F., Et al., Achievements and trends in photoelectrocatalysis: from environmental to energy applications, Electrocatalysis, 6, 5, pp. 415-441, (2015)
[4]  
Zhang B.T., Xiang W.X., Jiang X.M., Et al., Oxidation of dyes by alkaline-activated peroxymonosulfate, Journal of Environmental Engineering, 142, 4, (2016)
[5]  
Daghrir R., Drogui P., El Khakani M.A., Photoelectrocatalytic oxidation of chlortetracycline using Ti/TiO <sub>2</sub> photo-anode with simultaneous H <sub>2</sub> O <sub>2</sub> production , Electrochimica Acta,
[6]  
Wu B.D., Yin R., Zhang G.Y., Et al., Effects of water chemistry on decolorization in three photochemical processes: Pro and cons of the UV/AA process, Water Research, 105, pp. 568-574, (2016)
[7]  
Zhao H.Y., Chen Y., Peng Q.S., Et al., Catalytic activity of MOF(2Fe/Co)/carbon aerogel for improving H <sub>2</sub> O <sub>2</sub> and•OH generation in solar photo-electro-fenton process , Applied Catalysis B: Environmental, 203, pp. 127-137, (2017)
[8]  
Ghanbari F., Moradi M., Application of peroxymonosulfate and its activation methods for degradation of environmental organic pollutants: review, Chemical Engineering Journal, 310, pp. 41-62, (2017)
[9]  
Antoniou M.G., de la Cruz A.A., Dionysiou D.D., Degradation of microcystin-LR using sulfate radicals generated through photolysis, thermolysis and e <sup>-</sup> transfer mechanisms , Applied Catalysis B: Environmental, 96, 3-4, pp. 290-298, (2010)
[10]  
Yuan R.X., Ramjaun S.N., Wang Z.H., Et al., Effects of chloride ion on degradation of acid orange 7 by sulfate radical-based advanced oxidation process: implications for formation of chlorinated aromatic compounds, Journal of Hazardous Materials, 196, pp. 173-179, (2011)