Coordinated Control Strategy of Reactive Compensation for HVDC Converter Station Connected to Weak AC System

被引：0
|
作者：
Ding L. [1 ,2 ]
Shen Y. [2 ]
Xu J. [1 ]
Guo H. [2 ]
Li S. [1 ]
Zhang B. [2 ]
机构：
[1] National Electric Power Conversion and Control Engineering Technology Research Center (Hunan University), Changsha
[2] State Grid Hunan Electric Power Corporation Research Institute, Changsha
来源：
Xu, Jiazhu (xujiazhu02@hotmail.com) | 1600年 / Automation of Electric Power Systems Press卷 / 41期
基金：
中国国家自然科学基金;
关键词：
Direct current transmission; Multi-mode control strategy; Power fluctuation; Weak AC system;
D O I：
10.7500/AEPS20160921001
中图分类号：
学科分类号：
摘要：
Coordinated control of reactive power compensation is essential to the stability of bus voltage in high voltage direct current (HVDC) connected to weak AC system and characterized with frequent power fluctuation. Based on the coordination of the static synchronous compensator and fixed capacitors, a multi-mode control strategy is proposed, including the steady-state voltage regulation mode, the automatic voltage control (AVC) mode and the transient control mode. In the steady voltage regulation mode, the converter bus voltage can be controlled at its rated value with zero steady-state error by the coordinated control of the static synchronous compensator (STATCOM) and capacitor bank, while the reactive component devices of the HVDC converter will participate in the voltage regulation of nearby power grid in the AVC mode, and the transient control mode is created for mitigating voltage fluctuation and reducing the probability of commutation failure during grid fault period. Besides, according to the actual parameters of the ±800 kV DC power transmission project from Jiuquan to Hunan, a model is established. Then, different working conditions, such as DC power fluctuation, operation complying with the AVC commands and short-circuit accident are carried out. The correctness and effectiveness of the proposed control strategy are verified by the simulation results. © 2017 Automation of Electric Power Systems Press.
引用
收藏
页码：22 / 29
页数：7
相关论文
共 14 条
  • [1] Zou X., Jiang W., Li Y., Et al., Reactive power configuration scheme of ±800 kV Jiuquan-Hunan UHVDC project, Electric Power Construction, 36, 9, pp. 43-49, (2015)
  • [2] Liao G., Xie X., Hou Y., Et al., Impacts of 800 kV DC power transmission from Jiuquan to Hunan on transient voltage stability of Hunan power grid, Power System Technology, 36, 2, pp. 23-28, (2012)
  • [3] Zhao S., Wang Y., Li L., Et al., Optimization of control and protection strategies for Qinghai-Tibet ±400 kV HVDC project, Automation of Electric Power Systems, 37, 9, pp. 129-133, (2013)
  • [4] Zhou C., Xu Z., Simulation and analysis of recovery characteristics of HVDC connected to AC system with weak strength, Power System Technology, 27, 11, pp. 18-21, (2003)
  • [5] Zhuang Y., Menzies R.W., Nayak O.B., Et al., Dynamic performance of a STATCON at an HVDC inverter feeding a very weak AC system, IEEE Trans on Power Delivery, 11, 2, pp. 958-964, (1996)
  • [6] Kim C.K., Kim J.Y., Lee S.D., Et al., Stability enhancement in HVDC system with STATCOM, Engineering, 3, 11, pp. 1072-1081, (2011)
  • [7] Zhao C., Li D., Liu Y., Et al., Control method for HVDC system with STATCOM, High Voltage Engineering, 40, 8, pp. 2440-2448, (2014)
  • [8] Li C., Huang W., Yuan Z., Et al., Systematic control strategies for ±200 Mvar cascaded STATCOM in China southern power grid, Automation of Electric Power Systems, 37, 3, pp. 116-121, (2013)
  • [9] Xu J., Yuan Z., Wang L., Et al., Design and simulation of voltage control strategies for STATCOM participating in AVC, Electric Power Automation Equipment, 35, 10, pp. 115-120, (2015)
  • [10] Xu Z., Characteristic of HVDC connected to weak AC systems: Part 1 HVDC transmission capability, Power System Technology, 21, 1, pp. 12-16, (1997)
12