Impact of intake pipe's structure on the non-uniformity of intake air for diesel engine with one - and three -dimensional coupled simulation model

被引：0
作者：
School of Mechanical Engineering, Beijing Institute of Technology, Beijing, China [1 ]
不详 [2 ]
机构：
[1] School of Mechanical Engineering, Beijing Institute of Technology, Beijing
[2] Ordnance Science Institute of China, Beijing
来源：
Neiranji Gongcheng | / 5卷 / 96-101期
关键词：
Diesel engine; IC engine; Intake pipe; Non-uniformity of intake; One-three dimensional coupled simulation;
D O I：
10.13949/j.cnki.nrjgc.2015.05.017
中图分类号：
学科分类号：
摘要：
AVL BOOST and AVL FIRE were employed to establish a one dimensional thermal dynamic simulation model and a three dimensional fluid simulation model of intake pipe for a V-type 8-cylinder diesel engine respectively. The coupled simulation of one-dimensional model and three-dimensional model was adopted to analyze the non-uniformity of intake air between a II-type intake pipe and a ring intake pipe as well as the transient flow field inside the manifolds with different crank angle. It is showed that there is an air snatch effect between the two cylinders in fire order on the same side; compared with the II-type intake pipe, the ring intake pipe can amplify the volume of inlet air room and reduce the air snatch effect which may ease induction distribution unevenness for the diesel engine. ©, 2015, Chinese Society for Internal Combustion Engines. All right reserved.
引用
收藏
页码：96 / 101
页数：5
相关论文
共 9 条
  • [1] Du W., Liu F.S., Li Z.J., Experimental study on fluctuation of intake pressure in turbocharged diesel engine, Chinese Internal Combustion Engine Engineering, 27, 3, pp. 37-40, (2008)
  • [2] Du W., Liu F.S., Li Z.J., Experimental study on the rules of variation of exhaust gas pressure in turbocharged diesel engine, Transactions of Beijing Institute of Technology, 1, pp. 37-40, (2009)
  • [3] Du W., Sun W.H., Liu F.S., Study on intake air nonuniformity of turbocharged multi-cylinder diesel engine, Chinese Internal Combustion Engine Engineering, 29, 4, pp. 27-30, (2010)
  • [4] Du W., Liu F.S., Qiao W.R., Influence of firing order on intake air nonuniformity for turbocharged diesel engine, Chinese Internal Combustion Engine Engineering, 30, 8, pp. 87-92, (2011)
  • [5] Du W., Shan W.Y., Liu F.S., Influence of exhaust pipe structure on Intake non-uniformity of turbocharged Multi-cylinder diesel engine, Transactions of Beijing Institute of Technology, 6, pp. 580-584, (2012)
  • [6] Jiang G.H., Tian M.M., Analysis of induction distribution non-evenness of EQD180N-20 engine, Journal of Wuhan University of Technology, 30, 6, pp. 1008-1014, (2006)
  • [7] Ye M.H., Huang L., Shuai S.J., Et al., Ptimization of gasoline engine intake system based on 1D, 3D and coupled simutilations, Vehicle Engine, 6, pp. 44-49, (2007)
  • [8] Yin Y.E., Tian Y.H., Liu S., Optimization of diesel intake system based on 1D/3D coupling model, Small Internal Combustion Engine and Motorcycle, 40, 2, pp. 75-77, (2011)
  • [9] Yin Y.E., Liu S., Tian Y.H., Simulation analysis of air-intake unevenness in gas engine, Internal Combustion Engines, 2, pp. 14-26, (2010)
1