Multi-Response Optimization in Drilling of MWCNTs Reinforced GFRP Using Grey Relational Analysis

The present work concentrates on the use of Grey Relational Analysis for optimizing the drilling parameters like weight percentage of multi-wall carbon-nanotube (MWCNTs), cutting speed and feed rate on the thrust force and the delamination factor in the drilling of GFRP composites. Full factorial design is utilized for the trial. Analysis of variance (ANOVA) is applied to determine the significance of drilling parameters on multi-response. Considering the multi-response optimization results, which are acquired from the largest Grey Relational Grade (GRG), it is determined that optimal parameters are 1 wt. % MWCNTs, cutting speed 25 m/min, and feed rate 0.10 mm/rev to minimize concurrently thrust force and delamination factor. It is provided that the percentage development in GRG with the multi-response optimization is 50.53%. It is clearly indicated that the quality characteristics are crucially developed using this approach in the drilling of GFRP. According to the results of ANOVA of the GRG, the crucial factor is feed rate. Validation experiment was confirmed by computing the confidence level within the interval width. Eventually, results of validation experiment with the optimum drilling conditions settings have indicated that the proposed model develops overall performance of drilling process. © 2022, Strojarski Facultet. All rights reserved.