Tribology testing to friction determination in sheet metal forming processes

被引：8

作者：

Makhkamov A. ^{[1
]}

Wagre D. ^{[2
]}

Baptista A.M. ^{[1
]}

Santos A.D. ^{[1
]}

Malheiro L. ^{[3
]}

机构：

[1] FEUP, Universidade do Porto, Rua Dr. Roberto Frias, Porto

[2] Department of Mechanical Engineering, Indian Institute of Technology (IIT) Delhi, Hauz Khas, New Delhi –

[3] Inapal Metal, Rua Gomes Teixeira 153, Lugar da Esprela, Apartado 359, Trofa

来源：

Ciencia e Tecnologia dos Materiais | 2017年 / 29卷 / 01期

关键词：

Friction; lubricant; pressure; sheet metal forming; sliding velocity; steel;

D O I：

10.1016/j.ctmat.2016.07.002

中图分类号：

学科分类号：

摘要：

Reciprocating sliding tests were performed in order to find the effect of lubricant properties and other variables on the coefficient of friction of the steel sheets “Cold Rolled HSLA 380” in dry and lubricated conditions. For this material, tribology tests were performed with different lubricants. Test results showed that values of the coefficient of friction presented different patterns. The coefficient of friction varies over a wide range with different lubricating conditions and different sliding velocities. For some sliding velocities, the coefficient of friction is stable and lower, while for others it is unstable and higher. © 2017 Portuguese Society of Materials (SPM)

引用

页码：e249 / e253

页数：4

共 10 条

[1]

Lee B.H., Keum Y.T., Wagoner R.H., J. Mater. Process. Technol., 130-131, (2002)

[2]

Ceretti E., Fiorentino A., Giardini C., Int. J. Mat. Form., 1, (2008)

[3]

Mang T., Dresel W., Lubricants and Lubrication, (2007)

[4]

Aleksandrovich S., Stefanovic M., Vujinovic T., Tribol. Ind., 25, 3&4, (2003)

[5]

Buyanovskii I., J. Frict. W, 31, 1, (2010)

[6]

(2016)

[7]

Bhushan B., Introduction to Tribology, (2013)

[8]

Trzepiecinski T., Bazan A., Lemu H.G., Int. J. Automot. Technol., 16, 5, (2015)

[9]

Ghassemieh E., New Trends and Developments in Automotive Industry, pp. 365-394, (2011)

[10]

Padap A.K., Chaudhari G.P., Nath S.K., Dry Sliding Wear and Corrosion Behavior of Ultrafine-grained HSLA Steel Processed using Multi Axial Forging, in Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling, (2011)

← 1 →