Hobbing method of face gear based on spherical hob

被引：0
|
作者：
Wang Y. [1 ]
Tang W. [1 ]
Yin Y. [1 ]
Lan Z. [1 ]
Hou L. [1 ]
Jia S. [2 ]
机构：
[1] School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing
[2] China North Vehicle Research Institute, Beijing
来源：
Wang, Yanzhong (yzwang63@buaa.edu.cn) | 1600年 / Beijing University of Aeronautics and Astronautics (BUAA)卷 / 43期
基金：
中国国家自然科学基金;
关键词：
Face gear; Hobbing; Machining simulation; Spherical hob; Worm;
D O I：
10.13700/j.bh.1001-5965.2016.0826
中图分类号：
学科分类号：
摘要：
Face gear transmission has outstanding advantages, and has broad application prospects in the field of aviation. In order to improve the machining efficiency of face gear, the spherical gear hob and hobbing of face gear based on spherical gear hob were studied. The forming process of gear shaping was derived according to the forming principle. The process of the evolution from the cylindrical gear to the basic worm of spherical gear hob was studied, the forming method of spherical hob was analyzed, and the surface equation and spiral angle of the basic worm of spherical gear hob were deduced. A coordinate system was built for face gear machining process based on spherical hob, and the formula of face gear obtained by hobbing was deduced. The machining simulation of two cases was carried out using VERICUT. The hobbing was performed and the detection results show that the spherical gear cutter can be used in the machining of face gear. © 2017, Editorial Board of JBUAA. All right reserved.
引用
收藏
页码：441 / 448
页数：7
相关论文
共 20 条
  • [1] Litvin F.L., Zhang Y., Wang J.C., Et al., Design and geometry of face-gear drives, Journal of Mechanical Design, 114, 4, pp. 642-647, (1992)
  • [2] Litvin F.L., Egelja A., Tan J., Computerized design, generation and simulation of meshing of orthogonal offset face-gear drive with a spur involute pinion with localized bearing contact, Mechanism and Machine Theory, 33, 1-2, pp. 87-102, (1998)
  • [3] Litvin F.L., Wang J.C., Bossler R.B., Et al., Application of face-gear drives in helicopter transmissions, Journal of Mechanical Design, 116, 3, pp. 672-676, (1992)
  • [4] Chen Y.D., Bossler R.B., Design, analysis, and testing methods for a split-torque face-gear transmission, 31st Joint Propulsion Conference and Exhibit, (1995)
  • [5] Lewicki D.G., Heath G.F., Filler R.R., Et al., RDS-21 face-gear surface durability tests: ARL-TR-4089, (2007)
  • [6] Heath G.F., Filler R.R., Tan J., Development of face gear technology for industrial and aerospace power transmission: NASA/CR-2002-211320, (2002)
  • [7] Wang Y.Z., Lan Z., Hou L.W., Et al., A precision generating grinding method for face gear using CBN wheel, International Journal of Advanced Manufacturing Technology, 79, 9, pp. 1839-1848, (2015)
  • [8] Miller E.W., Hob for generating crown gears
  • [9] Wang Y.Z., Wu C.H., Ge X.Y., Et al., Basal worm designing method of face-gear hob, Journal of Beijing University of Aeronautics and Astronautics, 35, 2, pp. 166-169, (2009)
  • [10] Li Z.M.Q., Zhu R.P., A study of worm of hobbing or grinding wheel for face gear, Mechanical Science and Technology for Aerospace Engineering, 28, 1, pp. 98-101, (2009)
12