Analyzing and controlling distortion of aircraft aluminium alloy structural part in NC machining

被引：0

作者：

Mei, Zhongyi ^{[1
]}

Gao, Hong ^{[2
]}

Wang, Yunqiao ^{[3
]}

机构：

[1] School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

[2] Manufacture Engineering Department, Chengdu Aircraft Industrial Co. Ltd, Chengdu 610092, China

[3] School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

来源：

Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics | 2009年 / 35卷 / 02期

关键词：

FEM (finite element method) - Finite element analysis model - Machining distortion - Numerical control machining - Practical experience - Simulation - Temperature simulations - Thermal-mechanical coupling;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

引用

页码：146 / 150

共 26 条

[21] Studies on Aureobasidium pullulans forming biofilm on high strength aluminium alloy, a structural component, in aircraft fuel tanks
Srivastava, RB
Awasthi, M
Upreti, MC
Mathur, GN
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2006, 13 (02) : 135 - 139
[22] Prediction of machining quality due to the initial residual stress redistribution of aerospace structural parts made of low-density aluminium alloy rolled plates
Cerutti, X.
Arsene, S.
Mocellin, K.
INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2016, 9 (05) : 677 - 690
[23] Prediction of machining quality due to the initial residual stress redistribution of aerospace structural parts made of low-density aluminium alloy rolled plates
X. Cerutti
S. Arsene
K. Mocellin
International Journal of Material Forming, 2016, 9 : 677 - 690
[24] Analyzing the effect of WEDM parameters on machining of heat treated SiC and TiO2 reinforced LM25 aluminium alloy hybrid composite using Taguchi methodology
Singh, S. Prathap
Raja, D. Elil
Ananthapadmanaban, D.
Sonar, Tushar
Ivanov, Mikhail
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2025, 19 (01): : 37 - 46
[25] An interferometric examination of the oxide/metal interface and the coating surface after anodising an aluminium alloy with differing microstructures and surface finish. Part 2. Machined surfaces, and some effects of post-machining finishing.
Forsyth, PJE
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2000, 37 (06): : 326 - +
[26] STUDIES ON THE PROPERTIES OF ALUMINIUM ALLOY-STEEL TRANSITION PIECES FOR STRUCTURAL TRANSITION JOINT (STJ) OF SHIP SUPER STRUCTURE (PART IV) - TEST RESULTS ABOUT MECHANICAL PROPERTIES AND MICROSCOPIC OBSERVATIONS OF THE CORROSION TESTED STJ.
Anon
Keikinzoku Yosetsu/Journal of Light Metal Welding and Construction, 1983, 21 (07): : 315 - 325

← 1 2 3 →