Characteristics of wood tar produced as byproduct from two types of the kiln in the manufacture of oak charcoal

被引：0
作者：
Yang B.S. [1 ]
Yang J. [1 ]
Kim D.-Y. [1 ]
Kim J.-K. [2 ]
Hwang W.-J. [3 ]
Kwon G.-J. [1 ]
机构：
[1] College of Life Science and Biotechnology, Dongguk University, Goyang-Si
[2] Gyeonggido Business Science Accelerator, Suwon-Si
[3] Korea Forest Research Institute, Department of Forest Products, Seoul
来源：
Kwon, Gu-Joong (gjkwon@dongguk.edu) | 1600年 / Korean Society of Wood Science Technology卷 / 45期
基金：
新加坡国家研究基金会;
关键词：
Lignin; Mechanical steel kiln; Pyrolysis; Traditional kiln; Wood tar;
D O I：
10.5658/WOOD.2017.45.6.772
中图分类号：
学科分类号：
摘要：
This study investigated the characteristics of wood tar, produced as a byproduct during the production of charcoal using oak wood by the modified traditional kiln and mechanical steel kiln. The wood tar was analyzed with a number of techniques, including Py-GC/MS, NMR, MALDI-TOF, FT-IR, TG and DSC. The Py-GC/MS analysis indicated that modified traditional kiln generated a higher hydrocarbon ratio in the wood tar than that of mechanical steel kiln. On the other hand, mechanical steel kiln resulted in a higher proportion of phenolic and aromatic hydrocarbon components than that of modified traditional kiln. Those results were also confirmed by NMR analysis. The MALDI-TOF analysis suggested that the wood tar produced in the mechanical steel kiln had a slightly higher molecular weight than the wood tar produced in the modified traditional kiln. In addition, the FT-IR analysis showed characteristic peak of symmetrical stretching vibration of CH3 from the modified traditional kiln while characteristic peaks of the C-C and C-O stretching vibration were observed from the mechanical steel kiln. Moreover, TG and DSC analysis suggested that the mechanical steel kiln is more thermally stable than that of modified traditional kiln. Those findings clearly showed that the method of making charcoal greatly affects the properties of wood tar.
引用
收藏
页码：772 / 786
页数：14
相关论文
共 33 条
  • [1] Ahn B.J., Lee S.M., Evaluating the fuel characteristics of wood pellets fabricated with wood tar and starch as an additive, Journal of the Korean Wood Science & Technology, 42, 3, pp. 318-326, (2014)
  • [2] Alen R., Kuoppala E., Oesch P., Formation of the main degradation compound groups from wood and its components during pyrolysis, Journal of Analytical and Applied Pyrolysis, 36, 2, pp. 137-148, (1996)
  • [3] Amen-Chen C., Pakdel H., Roy C., Separation of phenols from eucalyptus wood tar, Biomass and Bioenergy, 13, 1-2, pp. 25-37, (1997)
  • [4] Ben H., Ragauskas A.J., NMR characterization of pyrolysis oils from kraft lignin, Energy & Fuels, 25, 5, pp. 2322-2332, (2011)
  • [5] Blanco P.H., Wu C., Onwudili J.A., Williams P.T., Characterization of tar from the pyrolysis/gasification of refuse derived fuel: Influence of process parameters and catalysis, Energy &, Fuels, 26, 4, pp. 2107-2115, (2012)
  • [6] Brebu M., Cazacu G., Chirila O., Pyrolysis of lignin -A potential method for obtaining cheminals and/or fuels, Cellulose Chemistry and Technology, 45, 1-2, pp. 43-50, (2011)
  • [7] Brebu M., Vasile C., Thermal degradation of lignin -A review, Cellulose Chemistry and Technology, 44, 9, pp. 353-363, (2010)
  • [8] De Wild P.J., Huijgen W.J.J., Gosselink R.J.A., Lignin pyrolysis for profitable lignocellulosic biorefineries, Biofuels, Bioproducts and Biorefining, 8, 5, pp. 645-657, (2014)
  • [9] Griessacher T., Antrekowitsch J., Steinlechner S., Charcoal from agricultural residues as alternative reducing agent in metal recycling, Biomass and Bioenergy, 39, pp. 139-146, (2012)
  • [10] Iatridis B., Gavalas G.R., Pyrolysis of a precipitated kraft lignin, Industrial & Engineering Chemistry Product Research and Development, 18, 2, pp. 127-130, (1979)
1234