Review on influencing factors of lateral cracks formation in oxide of zirconium alloys

被引：0

作者：

Zhang L.-N. ^{[1
]}

Chen L.-Y. ^{[1
]}

机构：

[1] School of Science, Jiangsu University of Science and Technology, Zhenjiang

来源：

Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals | 2017年 / 27卷 / 10期

基金：

中国国家自然科学基金;

关键词：

Alloying element; Corrosion resistance; Lateral crack; Zirconia; Zirconium alloy;

D O I：

10.19476/j.ysxb.1004.0609.2017.10.16

中图分类号：

学科分类号：

摘要：

The corrosion kinetics transition phenomenon of zirconium alloys has decisive effect on the service life of nuclear zirconium fuel tubes. The lateral cracks in the oxide of zirconium alloy are the principal cause of corrosion kinetics transition. By far, there is no systematical study on the factors which affecting the production of lateral cracks. Based on the nature of formation of lateral cracks, the influences of mechanical properties of matrix, second phase particles, tetragonal zirconia in oxide and alloying elements on corrosion transition phenomenon were discussed, and the driving force for the formation of lateral cracks and the reasons for nucleation regions of cracks were revealed. It is pointed out that deeply investigate on these four factors could contribute to decrease the production of lateral cracks in oxide and enhance the corrosion resistance of zirconium alloys. © 2017, Science Press. All right reserved.

引用

页码：2091 / 2097

页数：6

共 55 条

[1]

Wei J., Frankel P., Polatidis E., Blat M., Ambard A., Comstock R.J., Hallstadius L., Hudson D., Smith G.D.W., Grovenor C.R., The effect of Sn on autoclave corrosion performance and corrosion mechanisms in Zr-Sn-Nb alloys, Acta Materialia, 61, 11, pp. 4200-4214, (2013)

[2]

Lee J.H., Hwang S.K., Effect of Mo addition on the corrosion resistance of Zr-based alloy in water containing LiOH, Journal of nuclear materials, 321, 2, pp. 238-248, (2003)

[3]

Ly A., Ambard A., Blat-Yrieix M., Legras L., Frankel P., Preuss M., Curfs C., Parry G., Bre'chet Y., Understanding crack formation at the metal/oxide interface during corrosion of Zircaloy-4 using a simple mechanical model, Journal of ASTM International, 8, 9, pp. 1-18, (2011)

[4]

Yilmazbayhan A., Motta A.T., Comstock R.J., Sabol G.P., Lai B., Cai Z.H., Structure of zirconium alloy oxides formed in pure water studied with synchrotron radiation and optical microscopy: relation to corrosion rater, Journal of Nuclear Materials, 324, 1, pp. 6-22, (2004)

[5]

Park J.Y., Choi B.K., Yoo S.J., Jeong Y., Corrosion and oxide properties of HANA alloys, Journal of ASTM International, 5, 5, pp. 471-485, (2008)

[6]

Ni N., Lozano-Perez S., Sykes J.M., Smith G.D.W., Grovenor C.R.M., Focussed ion beam sectioning for the 3D characterisation of cracking in oxide scales formed on commercial ZIRLO<sup>™</sup> alloys during corrosion in high temperature pressurised water, Corrosion Science, 53, 12, pp. 4073-4083, (2011)

[7]

Polatidis E., Frankel P., Wei J., Klaus M., Comstock R.J., Ambard A., Preuss M., Residual stresses and tetragonal phase fraction characterisation of corrosion tested Zircaloy-4 using energy dispersive synchrotron X-ray diffraction, Journal of Nuclear Materials, 432, 1, pp. 102-112, (2013)

[8]

Likhanskii V.V., Aliev T.N., Kolesnik M.Y., Evdokimov I.A., Zborovskii V.G., Method of elastic energy minimization for evaluation of transition parameters in oxidation kinetics of Zr alloys, Corrosion Science, 61, pp. 143-147, (2012)

[9]

Chen L.-Y., Li J.-X., Zhang Y., Zhang L.-C., Lu W.-J., Zhang L.-F., Wang L.-Q., Zhang D., Effects of alloyed Si on the autoclave corrosion performance and periodic corrosion kinetics in Zr-Sn-Nb-Fe-O alloys, Corrosion Science, 100, pp. 651-662, (2015)

[10]

Chen L.-Y., Li J.-X., Zhang Y., Zhang L.-C., Lu W.-J., Zhang L.-F., Wang L.-Q., Zhang D., Zr-Sn-Nb-Fe-Si-O alloy for fuel cladding candidate: Processing, microstructure, corrosion resistance and tensile behavior, Corrosion Science, 100, pp. 332-340, (2015)

← 1 2 3 4 5 6 →