Kinematics analysis and optimization design of multi-link high-speed precision press

被引：0
作者：
Li M. [1 ]
Liu H. [1 ]
Li F. [1 ]
Xiao M. [1 ]
机构：
[1] College of Engineering, Nanjing Agricultural University, Nanjing
来源：
Xiao, Maohua (xiaomaohua@njau.edu.cn) | 2018年 / Totem Publishers Ltd卷 / 14期
关键词：
ADAMS; High-speed precision press; Kinematics; Multi-link; Optimization design;
D O I：
10.23940/ijpe.18.11.p26.27982807
中图分类号：
学科分类号：
摘要：
In this paper, taking the multi-link driving mechanism of a high-speed precision press as the research object, the corresponding kinematics equations are deduced. At the same time, kinematics analysis is performed by using MATLAB software to obtain the motion law of the slider, and the advantage of this mechanism is proposed in comparison with the crank slider mechanism. Then, based on ADAMS software, the parametric model of the driving mechanism is established and simulated. By comparing the simulation data of being imported into MATLAB with the derived formula, the correctness of the parametric model is verified. In addition, by analyzing the influence of the length change of each rod on the stamping slider and the mechanical pressure angle, the multi-objective optimization of the mechanism is carried out, which provides reference for the optimization design of homogeneous mechanisms. © 2018 Totem Publisher, Inc. All rights reserved.
引用
收藏
页码：2798 / 2807
页数：9
相关论文
共 23 条
  • [1] Song Y.Q., Optimization Design and Motion Simulation of Multi-Link Mechanism of Mechanical Press, (2011)
  • [2] Deng M., Hu G.M., Lu L., The current situation and development trend of fine blanking press, Forging Technology, 41, 8, pp. 1-6, (2016)
  • [3] Zhao S.D., Zhang X.L., Gao C.Y., Yang H., Current situation and development trend of high speed press, Forging Equipment and Manufacturing Technology, 1, pp. 17-25, (2005)
  • [4] Sun X.Y., Optimization Design and Dynamic Balance Analysis of Multi-Link High-Speed Punch Structure, (2014)
  • [5] He Y.Y., Li Z.F., Chen C., Study on the motion characteristics of a multi-link press with a series of four-bar mechanism, Mechanical Design, 5, pp. 87-90, (2015)
  • [6] Lu X.J., Research on balancing of a multi-link high-speed precision press, Key Engineering Materials, 567, pp. 175-182, (2013)
  • [7] Bai Y.Q., Zhu W.X., Optimization Design and Simulation Analysis of the Eight-Link Stamping Mechanism based on ADAMS, Journal of Yanbian University (Natural Science Edition), 2, pp. 175-178, (2015)
  • [8] Lu X.J., Zhu S.H., He G.J., Kinematics analysis of multi-link high-speed press, Chinese Mechanical Engineering, 22, 11, pp. 1297-1301, (2011)
  • [9] Li N., Kinematics Analysis and Optimization Design of the Typical Planar Six-Link Mechanism based on Adams, Development and Innovation of Electromechanical Products, 30, 1, pp. 62-63, (2013)
  • [10] Yao J., Zhou W., Guo W.Z., Analysis of modularity kinematics performance of multi-link press, Forging Technology, 33, 6, pp. 111-116, (2008)
123