Determination method of active calcium in persulfate phosphogypsum slag cement slurry

被引：0

作者：

Liu, Chen ^{[1
,2
]}

Zheng, Xu ^{[1
]}

Wang, Xin ^{[1
]}

Wei, Liying ^{[1
]}

Wang, Xufang ^{[1
]}

Yan, Bilan ^{[1
]}

Lin, Zongshou ^{[2
]}

机构：

[1] State Key Laboratory of Green Building Materials, China Building Materials Academy, Beijing

[2] School of Materials Science and Engineering, Wuhan University of Technology, Wuhan

来源：

Jianzhu Cailiao Xuebao/Journal of Building Materials | 2015年 / 18卷 / 04期

关键词：

Active calcium; Cement; Determination method; Phosphogypsum;

D O I：

10.3969/j.issn.1007-9629.2015.04.028

中图分类号：

学科分类号：

摘要：

Change rule of active calcium content in persulfate phosphogypsum slag cement slurry was investigated. Through the comparison of test methods such as hydrochloric acid titration and EDTA titration, sensitivity analysis of test conditions, and research on reproducibility and repeatability of the test methods, a determination method for the active calcium content in persulfate phosphogypsum slag cement slurry was established. The results show that compared with the pH value, the content of active calcium can better represent the activity of persulfate phosphogypsum slag cement slurry and has more correlation with macroscopic properties of the hydration products. Since persulfate phosphogypsum slag cement slurry belongs to the poor-calcium system with low content of active calcium, the determination method of hydrochloric acid titration is more suitable than EDTA titration. The repeatability and uniformity of hydrochloric acid titration are good, but it is sensitive to the mixing time and mixing temperature. It will be convenient that the mixing time should be 2h and mixing temperature should be 20℃. ©, 2015, Tongji University. All right reserved.

引用

页码：699 / 703

页数：4

共 10 条

[1] Huang Y., The development research of phosphorus gypsum slurry, (2010)
[2] Zhao Q., Zhang G., The research of steel slag modified phosphorus gypsum as cement retarder, Cement, 10, pp. 8-10, (2011)
[3] Yin X., The research of composition and performance of phosphorus gypsum cement, (2011)
[4] Lin Z., Huang Y., Effect of alkalinity on phosphogypsum-base non-calcined cement, Journal of Wuhan University of Technology, 31, 4, pp. 132-135, (2009)
[5] Potgieter J.H., Potgieter S.S., Mccrindle R.I., A comparison of the performance of various synthetic gypsuns in plant trials during the manufacturing of OPC clinker, Cement and Concrete Research, 34, 12, pp. 2245-2250, (2004)
[6] Cheng X., Miao J., The research of gypsum in the research of the development of the slag cement strength, Journal of the Chinese Ceramic Society, 1, 4, pp. 176-189, (1962)
[7] Singh M., Effect of phosphatic and fluoride impurities of phosphogypsum on the properties of selenite plaster, Cement and Concrete Research, 33, 9, pp. 1363-1369, (2003)
[8] Singh M., Role of phosphogypsum impurities on strength and microstructure of selenite plaster, Construction and Building Materials, 19, 6, pp. 480-486, (2005)
[9] Singh M., Treating waste phosphogypsum for cement and plaster manufacture, Cement and Concrete Research, 32, 7, pp. 1033-1038, (2002)
[10] Singh M., Garg M., Verma C.L., Et al., An improved process for the purification of phosphogypsum, Construction and Building Materials, 10, 8, pp. 597-600, (1996)

← 1 →