Application of open-pit and underground mining technology for residual coal of end slopes

被引：5
作者：
CHE Z. [1 ]
YANG H. [1 ,2 ]
机构：
[1] School of Mines, China University of Mining and Technology, Xuzhou
[2] Xiaolongtan Mineral Bureau
来源：
Mining Science and Technology | 2010年 / 20卷 / 02期
关键词：
economic benefit; end-slope; integrated open-pit and underground mining; resource recovery; surface coal mine;
D O I：
10.1016/S1674-5264(09)60195-2
中图分类号：
学科分类号：
摘要：
Given the conditions of residual coal from the boundary of a flat dipping open-pit mine, which uses strip areas mining and inner dumping with slope-covering, we propose an open-pit and underground integrated mining technology for residual coal of end slopes. In the proposal a conveyance road and ventilation conveyance near the slope are built, corresponding to the pit mining area and the surface coal mine dump, as well as an interval haulage tunnel and air-inlet tunnel. The outcome shows that such mining method may reduce the effect to slope stability from underground mining, it does not affect the dumping advance and has a high recovery rate of residual coal resources. The working face is timbered by single hydraulic props, transported by a scraper conveyor and supported by coal walls. This method of mining is one of layered top coal caving, with high resource recovery, low production cost where positive economic benefit can be realized. © 2010 China University of Mining and Technology.
引用
收藏
页码：266 / 270
页数：4
相关论文
共 17 条
  • [1] Han F., Xie F., Wang J.A., 3-D numerical simulation on the stability of rocks in transferred underground mining from open-pit, Journal of University of Science and Technology Beijing, 28, 6, pp. 509-514, (2006)
  • [2] Ma J.Y., Liu P.P., Wang S.R., Optimized analysis on boundary distance of mine with surface and underground combined mining, Coal Science and Technology, 37, 10, pp. 27-30, (2009)
  • [3] Wang S.R., Cai M.F., He M.C., Analysis of the stability of 3-D slope engineering in the transition from surface mining to underground mining, The Proceedings of the 2007 International Symposium on Mining Science and Safety Technology, pp. 156-160, (2007)
  • [4] Grieco N., Dimitrakopoulos R., Managing grade risk in stope design optimization: probabilistic mathematical programming model and application in sublevel stoping, Transactions of the Institutions of Mining and Metallurgy, Section A: Mining Technology, 116, 2, pp. 49-57, (2007)
  • [5] Cai Q.X., Zhou W., Che Z.X., Liu Y., Peng H.G., Research on the mining method and stripping ratio of steep end-slope mining in surface coal mines with flat coal deposit, Journal of China University of Mining & Technology, 36, 6, pp. 743-747, (2007)
  • [6] Che Z.X., Optimization of internal dumping development haulage system in anjialing surface coal mine, Journal of Mining & Safety Engineering, 24, 4, pp. 494-497, (2007)
  • [7] Cai Q.X., Zhou W., Shu J.S., Liu Y., Peng H.G., Analysis and application on end-slope timeliness of internal dumping under flat dipping ore body in large surface coal mine, Journal of China University of Mining & Technology, 37, 6, pp. 740-744, (2008)
  • [8] Liu Z.M., Wang S.L., Cai Q.X., Application of top-coal caving method in Anjialing surface mine, Journal of China University of Mining & Technology, 30, 5, pp. 515-517, (2001)
  • [9] Liu Y., Che Z.X., Li Z.Q., Cai Q.X., Analyses of end slope remnant coal mining and slope exposure time, Journal of China University of Mining & Technology, 35, 6, pp. 727-731, (2006)
  • [10] Shang T., Shu J.S., Cai Q.X., Space time relationship between end slope coal extraction and dumping and mining of open pits, Journal of China University of Mining & Technology, 30, 1, pp. 27-29, (2001)
12