Production of Medical Titanium Alloys with a Reduced Modulus of Elasticity by Selective Laser Melting. Review

被引：0

作者：

Sokolova, V. V. ^{[1
]}

Polozov, I. A. ^{[1
]}

Popovich, A. A. ^{[1
]}

机构：

[1] Peter Great St Petersburg Polytech Univ, St Petersburg, Russia

来源：

METAL SCIENCE AND HEAT TREATMENT | 2024年 / 66卷 / 5-6期

基金：

俄罗斯科学基金会;

关键词：

selective laser melting; titanium alloys; medical alloys; powder metallurgy; TI-NB-ZR; SHAPE-MEMORY; MECHANICAL-PROPERTIES; CORROSION-RESISTANCE; TANTALUM; STRENGTH; BEHAVIOR; MICROSTRUCTURE; PERFORMANCE; IMPLANTS;

D O I：

10.1007/s11041-024-01058-6

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Various systems of biocompatible alloys (mainly based on Ti - Nb and Ti - Ta systems), used for medical purposes, were considered. The specifics of the production of such alloys by selective laser melting have been analyzed. The potential of future use of additive technologies for the creation of high-quality, safe material using beta-titanium powder alloys for medical products with enhanced performance characteristics is discussed.

引用

页码：355 / 364

页数：10

共 69 条

[51] Theoretical study of the effects of alloying elements on the strength and modulus of β-type bio-titanium alloys [J].

Song, Y ;

Xu, DS ;

Yang, R ;

Li, D ;

Wu, WT ;

Guo, ZX .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 260 (1-2) :269-274

[52] Evaluation of the mechanical compatibility of additively manufactured porous Ti-25Ta alloy for load-bearing implant applications [J].

Soro, Nicolas ;

Attar, Hooyar ;

Brodie, Erin ;

Veidt, Martin ;

Molotnikov, Andrey ;

Dargusch, Matthew S. .

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2019, 97 :149-158

[53] The effect of pore geometry on the mechanical properties of selective laser melted Ti-13Nb-13Zr scaffolds [J].

Speirs, M. ;

Van Humbeeck, J. ;

Schrooten, J. ;

Luyten, J. ;

Kruth, J. P. .

FIRST CIRP CONFERENCE ON BIOMANUFACTURING, 2013, 5 :79-82

[54] Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum [J].

Thijs, Lore ;

Sistiaga, Maria Luz Montero ;

Wauthle, Ruben ;

Xie, Qingge ;

Kruth, Jean-Pierre ;

Van Humbeeck, Jan .

ACTA MATERIALIA, 2013, 61 (12) :4657-4668

[55]

Tokgoz E., 2023, TOTAL KNEE ARTHROPLA, P71

[56]

Venugopalan R., 2005, P 2005 MAT PROC MED

[57] Microstructural homogeneity and mechanical behavior of a selective laser melted Ti-35Nb alloy produced from an elemental powder mixture [J].

Wang, Jincheng ;

Liu, Yujing ;

Rabadia, Chirag Dhirajlal ;

Liang, Shun-Xing ;

Sercombe, Timothy Barry ;

Zhang, Lai-Chang .

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2021, 61 :221-233

[58] Selective laser melting produced layer-structured NiTi shape memory alloys with high damping properties and Elinvar effect [J].

Wang, Xiebin ;

Speirs, Mathew ;

Kustov, Sergey ;

Vrancken, Bey ;

Li, Xiaopeng ;

Kruth, Jean-Pierre ;

Van Humbeeck, Jan .

SCRIPTA MATERIALIA, 2018, 146 :246-250

[59]

WAPNER KL, 1991, CLIN ORTHOP RELAT R, P12

[60] EFFECTS OF FIT AND BANDING CHARACTERISTICS OF FEMORAL STEMS ON ADAPTIVE BONE REMODELING [J].

WEINANS, H ;

HUISKES, R ;

GROOTENBOER, HJ .

JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME, 1994, 116 (04) :393-400

← 1 2 3 4 5 6 7 →