Effect of configuration parameters of aerodynamic braking plates on aerodynamic characteristics of high-speed train

被引：0

作者：

Zhang, Puyang ^{[1
]}

Qiao, Feng ^{[2
]}

Wang, Shubin ^{[2
]}

Yin, Zhenkun ^{[2
]}

Yang, Chuan ^{[2
]}

Zhang, Xiang ^{[3
]}

Wang, Jiabin ^{[1
]}

Gao, Guangjun ^{[1
]}

机构：

[1] The State Key Laboratory of Heavy-duty and Express High-power Electric Locomotive, Central South University, Changsha

[2] CRRC Changchun Railway Vehicles Co., Ltd, Changchun

[3] Locomotive & Car Research Institute, China Academy of Railway Sciences Corporation Limited, Beijing

来源：

Journal of Railway Science and Engineering | 2024年 / 21卷 / 09期

关键词：

aerodynamic behaviour; aerodynamic braking; configuration parameters; high-speed train; numerical simulation;

D O I：

10.19713/j.cnki.43-1423/u.T20231921

中图分类号：

学科分类号：

摘要：

As the operational speeds of high-speed trains continue to increase, the challenges associated with ensuring the safety of high-speed train braking and emergency stopping become increasingly prominent. In response to this issue, aerodynamic braking plates are positioned at the streamlined front and other cross-sectional locations of the train body to address safety concerns. This study investigated the effects of factors such as the height of the braking plates, the design of the openings, and the coordinated placement of opening braking plates on the aerodynamic characteristics of the train, using the Reynolds-averaged Navier-Stokes (RANS) method based on the SST k-ω turbulence model. The correctness of the numerical simulation method was validated through wind tunnel experiments on a train equipped with aerodynamic braking plates. The research results are drawn as follow. The aerodynamic braking plates influence the surface pressure distribution characteristics of the train, inducing significant airflow separation phenomena. Additionally, the aerodynamic braking plates enhance the overall pressure differential resistance, thereby increasing the aerodynamic resistance of the train. Elevated aerodynamic braking plates lead to an expansion of the pressure distribution range, causing an increase in the distribution range of the recirculation zone behind the plates and increasing the aerodynamic resistance of the plates. The impact of variations in the design and position of the openings in the aerodynamic braking plates is not significant, but the design of the openings can strengthen the aerodynamic resistance experienced by the elevated aerodynamic braking plates in the rear. Elevating the braking plates reasonably results in the most pronounced aerodynamic resistance enhancement for the entire train, with a maximum increase effect reaching the 422.91% of the aerodynamic drag experienced by the original high-speed train. Compared to solely altering the design and position of the openings in the braking plates, the coordinated arrangement of openings and elevation demonstrates a better performance in aerodynamic resistance enhancement, with an effect of 420.67%. © 2024, Central South University Press. All rights reserved.

引用

页码：3481 / 3492

页数：11

共 23 条

[1] SONG Shiyang, KONG Longfei, HAN Tongxin, Study on the aerodynamic lift force of high-speed pantograph at speeds of 350 km/h and above, Journal of Railway Science and Engineering, 20, 10, pp. 3673-3684, (2023)
[2] ZHANG Jianbai, PENG Huishui, NI Dacheng, Et al., Overviewing braking technology of the high-speed trains [J], Electric Drive for Locomotives, 4, (2011)
[3] DONG Ximing, Technique progress of modern high-speed train, Railway Locomotive & Car, 26, 5, pp. 1-11, (2006)
[4] XIE Hongtai, WANG Hong, Design and simulation of “butterfly” wind resistance braking device for 400 km/h high-speed train, Journal of Beijing Jiaotong University, 46, 6, (2022)
[5] YOSHIMURA M, SAITO S, HOSAKA S, Et al., Characteristics of the aerodynamic brake of the vehicle on the Yamanashi Maglev test line[J], Quarterly Report of RTRI, 41, 2, (2000)
[6] YOSHIMURA M, SAITO S, HOSAKA S, Et al., Characteristics of the aerodynamic brake of the vehicle on the Yamanashi Maglev test line[J], Quarterly Report of RTRI, 41, 2, (2000)
[7] FUMIO KUROSAKI, Alfa-X starts three-year test programme, Foreign Railway Locomotive and Motor Car, 6, (2020)
[8] JI Cun, ZHENG Wen, Development of aerodynamic braking device for vehicles on Miyazaki test line, Smart Rail Transit, 33, 5, (1996)
[9] XIE Hongtai, WANG Hong, CHAI Wei, Design and simulation analysis of new wind resistance braking device for high-speed trains, Chinese Journal of Engineering Design, 30, 2, (2023)
[10] WANG Wei, XIE Hongtai, WANG Yunfei, Et al., Research on the influence of aerodynamic performance of high-speed train air brake blades, Electric Drive for Locomotives, 6, pp. 25-41, (2021)

← 1 2 3 →