Impact toughness of base metal and welded joints of X90 high-strength pipeline steel

被引：0

作者：

Bi Z. ^{[1
,2
]}

Yang J. ^{[1
,2
]}

Niu H. ^{[1
,2
]}

Huang X. ^{[1
,2
]}

机构：

[1] National Engineering Technology Research Center for Petroleum and Natural Gas Tubular Goods, Baoji

[2] Steel Pipe Research Institute of Baoji Petroleum Steel Pipe Co., Ltd., Baoji

来源：

| 2018年 / Harbin Research Institute of Welding卷 / 39期

关键词：

Acicular ferrite; Impact toughness; Welded joints; X90 pipeline steel;

D O I：

10.12073/j.hjxb.2018390245

中图分类号：

学科分类号：

摘要：

X90 pipeline steel pipe is a new type of high strength pipeline steel pipe being researched and developed. With the increase of pipe strength, the structure and properties of submerged arc welding seam become the key of research and control. The impact toughness in low temperature, fracture morphology, microstructure characteristics, grain orientation and percentage of large/small angle grain boundaries of weld seam, heat affected zone (HAZ) and base metal in X90 steel grade spiral submerged arc welded pipe manufacture were investigated by OM, SEM, TEM, EBSD and Charpy impact experiments. The results indicate that the microstructure near fracture zone of weld seam specimen was composed of acicular ferrite(AF) and quasi-polygonal ferrite (QPF). The form of M-A constituents shows diversity, sharp-angled clearly and the size increased as length×width =1.8 µm×0.5 µm. The values of average grain size was 3.12 μm and the proportion of large-angle grain boundaries was 67.15%. The microstructure near fracture zone of HAZ specimen was composed of granular bainite (GB) and multi-morphological M-A constituents, the M-A constituents in the grain boundary and crystal. The values of average grain size was 4.52 μm and the proportion of large-angle grain boundaries was 85.95%. The microstructure near fracture zone of base metal specimen was composed of fine AF, fine QPF, lath bainite (LB) and a small fine granular M-A (martenite/austenite) structure. The values of average grain size was 2.1 μm and the proportion of large-angle grain boundaries was 93.75%. Concentrated distribution of large size M-A constituents and the relatively small proportion of large-angle grain boundaries were the main reason for the poor impact toughness of weld. © 2018, Editorial Board of Transactions of the China Welding Institution, Magazine Agency Welding. All right reserved.

引用

页码：35 / 40

页数：5

共 27 条

[1]

Rosado D.B., Waele W.D., Vanderschueren D., Et al., Latest developments in mechanical properties and metallurgical features of high strength line pipe steels, International Conference on Sustainable Construction & Design, (2013)

[2]

Ishikawa N., Okatsu M., Endo S., Et al., Mass production and installation of X100 linepipe for strain-based design application, International Pipeline Conference, pp. 705-711, (2008)

[3]

Ayukawa N., Terada Y., Hara T., Et al., Properties research of high strength pipeline steel and its welded pipe, Welded Pipe and Tube, 28, 2, pp. 50-60, (2005)

[4]

Demofonti G., Mannucci G., Hillebrand H.G., Et al., Evaluation of the suitability of X100 steel pipes for high pressure gas transportation pipelines by full scale tests., Proceedings of IPC 2004 International Pipeline Conference, pp. 1-8, (2004)

[5]

Yoo J.Y., Ahn S.S., Seo D.H., Et al., New development of high grade X80 to X120 pipeline steels, Materials and Manufacturing Processes, 26, 1, pp. 154-160, (2011)

[6]

Zheng W., Zhang H., Liu X., Et al., Application of the strain-based design method in area of fault of Xin Yue Zhe pipeline, Welded Pipe and Tube, 38, 4, pp. 38-42, (2015)

[7]

Li H., Li X., Ji L., Et al., Strain based design for pipeline and development of pipe steel with high deformation resistance, Welded Pipe and Tube, 30, 5, pp. 5-11, (2007)

[8]

Ma J., Huangfu Y., Yang Z., Et al., Discussion on evaluation standards for sulfide stress corrosion cracking in oil & gas transmitting pipeline, Welded Pipe and Tube, 36, 3, pp. 61-64, (2013)

[9]

Shen K., Wang B., Application of TRIP effect in large deformation pipeline steel based on strain design, Welded Pipe and Tube, 36, 3, pp. 11-14, (2013)

[10]

Wang X., Li X., Wu S., Et al., Effect of austenitic state on the multi-phase control in X90 pipeline steel with high Nb content, Materials Today: Proceedings, 2, 7, pp. S701-S706, (2015)

← 1 2 3 →