Partial discharge type recognition based on support vector data description

被引：0

作者：

Tang, Ju ^{[1
]}

Lin, Junyi ^{[1
]}

Zhuo, Ran ^{[1
]}

Tao, Jiagui ^{[1
]}

机构：

[1] State Key Laboratory of Power Transmission Equipment and System Security and New Technology, Chongqing University

来源：

Gaodianya Jishu/High Voltage Engineering | 2013年 / 39卷 / 05期

关键词：

Outlying objects; Partial discharge; Pattern recognition; Support vector data description; Support vector machine; SVDD; SVM;

D O I：

10.3969/j.issn.1003-6520.2013.05.004

中图分类号：

学科分类号：

摘要：

Traditional methods of insulation defect recognition often perform not well due to the changes in defect development influenced by changing environmental conditions, as well as the scattered and complex partial discharge (PD) data obtained. Therefore, we proposed a support vector data description (SVDD) algorithm for PD pattern recognition of gas insulated switchgear (GIS). Based on the principle of maximum interval of support vector machine (SVM) and the one-to-multiple principle of multiple classification methods, the optimal radius SVDD (OR-SVDD) algorithm was proposed to solve the problems of traditional recognition methods, including low recognition rate, recognition error, recognition miss, and long recognition time. Simulation and experiments prove that the OR-SVDD algorithm for identification performs better than the traditional SVM algorithm: in a comparatively shorter time and with higher recognition rate, all data objects are described correctly, while the outlying objects are recognized in the target data objects effectively. Therefore, it is concluded that the OR-SVDD algorithm has a good application prospects in both on-line monitoring of power equipment and PD pattern recognition.

引用

页码：1046 / 1053

页数：7

共 21 条

[1]

Sun C., Xu G., Tang J., Et al., PD pattern recognition method using box dimension and information dimension as discriminating features in GIS, Proceedings of the CSEE, 25, 3, pp. 100-104, (2005)

[2]

Li J., Jiang T., He Z., Et al., Statistical distributions of partial discharges in oil-paper insulation under AC-DC combined voltages, High Voltage Engineering, 38, 8, pp. 1856-1862, (2012)

[3]

Satish L., Zaengl W.S., Can fractal features be used for recognition 3-D partial discharge patterns, IEEE Transactions on Dielectrics and Electrical Insulation, 2, 3, pp. 352-359, (1995)

[4]

Cheng Y., Xie X., Chen Y., Et al., Study on the fractal characteristics of ultra-wideband partial discharge in gas-insulated system (GIS) with typical defects, Proceedings of the CSEE, 24, 8, pp. 99-102, (2004)

[5]

Zhang X., Zhang L., Le B., Et al., Analysis on aging condition of stator winding insulation of generator based on the moment characteristics of partial discharge, Proceedings of the CSEE, 22, 5, pp. 94-98, (2002)

[6]

Gong Y., Liu Y., Wu L., Identification of partial discharge in gas insulated switchgears with fractal theory and support vector machine, Power System Technology, 35, 3, pp. 135-139, (2011)

[7]

Si W., Li J., Yuan P., Et al., Detection and identification techniques for multi-PD source in GIS, Proceedings of the CSEE, 29, 16, pp. 119-126, (2009)

[8]

Zhao W., Zhu Y., Zhang X., Combinational forecast for transformer faults based on support vector machine, Proceedings of the CSEE, 28, 25, pp. 14-19, (2008)

[9]

Sun L., Yang S., Application of functional link artificial neural networks constructed with least squares support vector machine in fault diagnosis of rolling bearings, Proceedings of the CSEE, 30, 8, pp. 82-87, (2010)

[10]

Vapnik V., The Nature of Statistical Learning Theory, pp. 138-146, (1995)

← 1 2 3 →