The optimization of weight removing and balancing for large blade based on minimum enclosing ball theory

被引：1

作者：

He, Fuben ^{[1
]}

Liang, Yande ^{[1
]}

Sun, Jiefu ^{[1
]}

Wang, Zhixiong ^{[2
]}

Guo, Chao ^{[1
]}

机构：

[1] School of Mechanical Engineering, Dalian University of Technology, Dalian

[2] Dalian Marine Propeller Co. Ltd., Dalian

来源：

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2015年 / 51卷 / 11期

关键词：

Dynamic balancing simulation; Minimum containing ball; Modular marine propeller; Parameter optimization; Removal processing ball;

D O I：

10.3901/JME.2015.11.064

中图分类号：

学科分类号：

摘要：

In the process of blade manufacturing, there exist the influences of manufacturing precision, material defects, assembling errors and other non-design factors, which cause the actual barycenter of modular marine propeller is inconsistent with the theoretical barycenter. Hence, it is necessary to correct the errors of barycenter position of blade by weight removing so as to satisfy the actual requirements and engineering applications. For the optimization of weight removing, it proposes the concept of minimum error containing ball based on the theory of minimum enclosing ball, and establishes the barycenter relationships in multi-blades to describe the error range of the barycenter for modular marine propeller. It also proposes the algorithm of removal processing ball for weight removing in order to judge whether the blade needs to handle or not. To verify the theories of minimum containing ball and removal processing ball about the barycenter, the parametric model of relevant blade is established. After applying sobol algorithm and TSearch algorithm to optimize the model, the weight removing area can be determined and the removing parameters which meet the conditions can be also obtained. The results indicate that to apply the enclosing ball theory to the optimization of weight removing can correct the barycenter errors and satisfy the requirements of dynamic balancing performance. ©2015 Journal of Mechanical Engineering.

引用

页码：64 / 70

页数：6

共 15 条

[1] Wu G., Yan J., Application and trend in development of marine propeller, Guangdong Shipbuilding, 4, pp. 49-51, (2008)
[2] Cao L., Yang Y., Liu J., Principle and method of frank milling a marine propeller with cylindrical cutter, Journal of Dalian University of Technology, 1, pp. 45-49, (2006)
[3] Han X., Mechanical Engineering Mechanics, (2002)
[4] Zhang P., Yang H., Analysis of design elements for conventional propeller, Jiangsu Ship, 6, pp. 1-3, (2006)
[5] Zeng Y., Li B., Peng F., Et al., Research on the estimation of the propeller allowance in NC machining, China Mechanical Engineering, 17, 6, pp. 566-569, (2006)
[6] Yu Y., Yu X., Guan Q., Calculation of processing quantity for the surface of blades of the propeller, Machinery Design and Manufacture, 5, pp. 100-101, (2003)
[7] Li F., Design of measurement system of the center of gravity, Annual Meeting of Chinese Intelligent Transportation, pp. 90-92, (2009)
[8] Tsang I.W., Kwok J.Y., Zurada J.M., Generalized core vector machines, IEEE Transactions on Neural Networks, 5, pp. 1126-1140, (2006)
[9] Gu X., Wang S., Novel domain tansfer learning approach using minimum enclosing ball, Computer Science, 7, pp. 187-191, (2013)
[10] Thomas L., Linus K., Fast and robust approximation of smallest enclosing balls in arbitrary dimensions, Computer Graphics Forum, 32, pp. 93-101, (2013)

← 1 2 →