Motion control of 6-DOF manipulator based on EtherCAT

被引：0
作者：
Li N. [1 ]
Ma H. [1 ]
Fei Q. [1 ]
Zhou H. [1 ]
Li S. [2 ]
Chen S. [1 ]
机构：
[1] Beijing Institute of Technology, 5 South Zhongguancun Street, Haidian District, Beijing
[2] Beijing University of Technology, No. 100 Pingleyuan,, Chaoyang District, Beijing
来源：
Ma, Hongbin (mathmhb@bit.edu.cn) | 2018年 / Fuji Technology Press卷 / 22期
基金：
中国国家自然科学基金;
关键词：
EtherCAT; Manipulator; Motion control; Trajectory planning;
D O I：
10.20965/jaciii.2018.p0415
中图分类号：
学科分类号：
摘要：
We introduce a real-time motion control system that uses the EtherCAT protocol and apply it to a manipulator with six degrees of freedom. The complexity of a multi-joint manipulator leads to higher requirements for synchronous and real-time performance. EtherCAT technology can greatly improve the performance in terms of accuracy, speed, capability, and band width in industrial control, which is crucial in our robot projects. In this paper, we discuss a servo motion control system based on EtherCAT using IgH as the open-source master station. A Linux operating system is adopted because of the advantages of open-source, high-efficiency, and high-stability operation as well as multi-platform support, which provide more flexibility, freedom, and extendability to developers. Considerable research has been conducted to explore EtherCAT technologies, completely implementing home-made codes with the aid of open-source libraries, debugging the master-slave communication process, and testing the resulting motion controller running on Linux or POSIX-compatible operating systems. To improve the real-time response of servo control, a real-time Xenomai kernel has been compiled, adopted, and tested, and it showed significant enhancement of the real time of a servo motion control system. Furthermore, we explore trajectory planning and inverse kinematic solutions. A trajectory planning method based on B-spline interpolation of three degrees, which makes each part of the trajectory planning curve have relative independence and continuity, is proposed for the kinematic trajectory planning problem in Cartesian space. A coordinate system is established using the modified D-H parameters method to obtain the inverse kinematics of the manipulator. The simulation and experimental results show that the calculation speed of inverse solutions is excellent and the motion of the manipulator is continuous and smooth. © 2018 Fuji Technology Press. All Rights Reserved.
引用
收藏
页码：415 / 428
页数：13
相关论文
共 25 条
  • [11] Jung I.-K., Lim S., An ethercat based control system for human-robot cooperation, Proc. of 2011 16th Int. Conf. on Methods & Models in Automation & Robotics, pp. 341-344, (2011)
  • [12] Gu K., Cao Q., Control system design of 6-dofs serial manipulator based on real-time ethernet, Proc. of 2014 IEEE Int. Conf. on Information and Automation, pp. 118-120, (2014)
  • [13] Liu D., Min H., Yang J., Research of robot control bus scheme based on ethercat, Computer Engineering and Design, 34, 4, pp. 1238-1243, (2013)
  • [14] Sung M., Et al., An EtherCAT-based motor drive for high precision motion systems, 9th IEEE Int. Conf. on Industrial Informatics (IN-DIN), (2011)
  • [15] Cereia M., Bertolotti I.C., Scanzio S., Performance of a real-time EtherCAT master under linux, IEEE Trans. on Industrial Informatics, 7, 4, pp. 679-687, (2011)
  • [16] Chaichawananit J., Saiyod S., Solving inverse kinematics problem of robot arm with adjustable snap-width a-star algorithm, Proc. of 13th Int. Conf. on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, (2016)
  • [17] Capisani L.M., Facchinetti T., Ferrara A., Real-time networked control of an industrial robot manipulator via discrete-time second-order sliding modes, Int. J. of Control, 83, 8, pp. 1595-1611, (2010)
  • [18] Zhou H., Et al., Sampled adaptive control for multi-joint robotic manipulator with force uncertainties, Proc. of 9th Int. Conf. on Intelligent Robotics and Applications, 9834, pp. 14-25, (2016)
  • [19] Chen Y.-C., Solving robot trajectory planning problems with uniform cubic b-splines, Optimal Control Applications & Methods, 12, 4, pp. 247-262, (1991)
  • [20] Rostan M., Stubbs J., Dzilno D., Ethercat enabled advanced control architecture, 2010 IEEE/SEMI Conf. on Advanced Semiconductor Manufacturing, (2010)
123