Fatigue reliability analysis on crankshaft of reciprocating pump

被引：3

作者：

Ye, Xiaoyan ^{[1
]}

Jiang, Xiaoping ^{[1
]}

Xu, Jianqiang ^{[1
]}

Shi, Weidong ^{[1
]}

机构：

[1] Research Center of Fluid Machinery Engineering and Technology, Jiangsu University

来源：

Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering | 2008年 / 44卷 / 10期

关键词：

Crankshaft; Fatigue limit; Fatigue reliability; Reciprocating pump; Reliability;

D O I：

10.3901/JME.2008.10.272

中图分类号：

学科分类号：

摘要：

Based on the example of crankshafts of three-plunger single-acting reciprocating pumps, analytic model for fatigue reliability of crankshaft is built by decomposing forces on it following the corresponding coordinate system, dispersing the periodic stress, and determining the computing cross-section. Data are derived by using the developed strength computation and verification software for reciprocating pump crankshaft and the fatigue reliability of crankshaft model is analyzed in detail by using the radius vector method. By the method, the fatigue reliability of a series of failed crankshafts and those with good actual use effect is computed and analyzed and reasonable value for fatigue reliability of crankshaft of three-plunger single-acting reciprocating pump is obtained. And the max plunger force that crankshaft can work safely and reliably is also calculated and applied to some crankshafts with too high original reliability, which make full use of the surplus capacity of the original reciprocating pump unit. Fatigue reliability analysis of reciprocating pump crankshaft has significant theoretical and practical application value.

引用

页码：272 / 276

页数：4

共 10 条

[1]

Reciprocating Pump Design, (1987)

[2]

Lee H.J., Dynamics and probabilistic fatigue analysis schemes for high-speed press machines, Computers and Structures, 50, pp. 11-19, (1994)

[3]

Zhou X., Yu X., Li Y., Et al., Investigation for the residual strength degeneration regular of crankshaft serving on steady fatigue load, Chinese Journal of Mechanical Engineering, 42, 4, pp. 213-217, (2006)

[4]

Xu W., Huang R., Zhao M., Et al., New calculation method of crankshaft fatigue strength, Chinese Internal Combustion Engine Engineering, 25, 5, pp. 51-55, (2004)

[5]

Zhao S., Wang Z., Antifatigue Design-Methods and Data, (1997)

[6]

Liu S., Reliability and Optimization Design of Mechanical Parts, (1993)

[7]

Zhao Y., On the strain-based fatigue reliability analysis, Chinese Journal of Mechanical Engineering, 37, 11, pp. 1-6, (2001)

[8]

Zhu X., Analysis of fatigue reliability of crank pin of beam, China Petroleum Machinery, 30, 7, pp. 19-21, (2002)

[9]

Huang S., Analysis method of dynamics on reciprocating pump, Chemical Engineering and Machinery, 15, 5, pp. 272-275, (1988)

[10]

Feng P., Sheng L., Wu Z., Et al., Study on the dynamic load and mechanical property of the plunger pump crankshaft, Machinery Design and Manufacture, 5, pp. 155-157, (2007)

← 1 →