A method extracting fault features of gear teeth fractures based on an auditory modeland probability density of extreme points

被引：0

作者：

Wu W. ^{[1
]}

Li Y. ^{[1
]}

Wang B. ^{[1
]}

Li G. ^{[1
]}

Shi Y. ^{[1
]}

机构：

[1] School of Mechanical Engineering & Automation, Northeastern University, Shenyang

来源：

Zhendong yu Chongji/Journal of Vibration and Shock | 2016年 / 35卷 / 19期

关键词：

Auditory model; Fault diagnosis; Feature extraction; Gear teeth fracture fault; Probability density; Transient signals;

D O I：

10.13465/j.cnki.jvs.2016.19.017

中图分类号：

学科分类号：

摘要：

The collision and impact at gear teeth fractures are the most important features in meshing process of gear pairs. Considering a human auditory system has an instinctive response to sudden transient acoustic signals, in order to extract transient impulse response components induced by gear teeth fracture faults, a method extracting fault features of gear teeth fractures based on an auditory model and signal probability density of extreme points was proposed. Firstly, band-pass filtering with Gammatone filters, phase adjustment and extreme points extraction for signals were conducted, and then the amplitude probability densities of extreme points were calculated, their derivatives were used to judge if there are transient impact components in all filtered signals. Those extreme points with transient impact components were extracted. Meanwhile, the whole system vibration might produce extreme points being irrelevant to gear teeth fracture impacts. In order to accurately extract impacts of gear teeth fractures, according to transient signals' frequency band continuity and multi-band distribution characteristics, an appropriate extraction method was designed. The real measured signals showed that the proposed method can accurately extract fault features of gear teeth fractures, and can extract impact components only induced by gear teeth fracture faults in a variety of transient impulse response components, and the extraction accuracy is higher. © 2016, Editorial Office of Journal of Vibration and Shock. All right reserved.

引用

页码：101 / 106

页数：5

共 11 条

[1]

Tang G., Pang E., Wang X., Research on gear fault diagnosis based on EMD, Mchine Tool & Hydraulics, 41, 13, pp. 188-190, (2013)

[2]

Feng W., Investigation on gear fracture failure based on vibration analysis, Journal of Guang Zhou Maritime College, 15, 1, pp. 13-16, (2007)

[3]

Ma R., Chen Y., Fault mechanism of a gear system with tooth broken, Journal of Vibration and Shock, 32, 21, pp. 47-51, (2013)

[4]

Jena D.P., Sahoo S., Panigrahi S.N., Gear fault diagnosis using active noise cancellation and adaptive wavelet transform, Measurement, 47, pp. 356-372, (2014)

[5]

Li M., Liang L., Wang S., Et al., Mechanical impact feature extraction method based on nonlinear manifold learning of continuous wavelet coefficients, Journal of Vibration and Shock, 31, 1, pp. 106-111, (2012)

[6]

Wang S., Cai G., Zhu Z., Et al., Transient signal analysis based on Levenberg-Marquardt method for fault feature extraction of rotating machines, Mechanical Systems and Signal Processing, 54, 55, pp. 16-40, (2015)

[7]

Yan B., Zhou F., Adaptive weak impulse extraction method of rolling bearings based on morphological lifting wavelet, Journal of Vibration and Shock, 32, 24, pp. 198-203, (2013)

[8]

Guo W., Tse P.W., Djordjevich A., Faulty bearing singnal recovery from large noise using a hybrid method based on spectral kurtosis and ensemble empirical mode decomposition, Measurement, 45, pp. 1308-1322, (2012)

[9]

Kaya E.M., Elhilali M., A temporal saliency map for modeling auditoryattention, 46th Annual Conference on Information Sciences and Systems, pp. 1-6, (2012)

[10]

Li Y., Zhang J., Dai L., A method extracting transient signals based on probability density of extreme points and on auditory model, Journal of Vibration and Shock, 34, 21, pp. 37-53, (2015)

← 1 2 →