Effect of welding parameters for a local dry cavity underwater welding process on the structure and properties of joints

被引：5

作者：

Rogalski, Grzegorz ^{[1
]}

Labanowski, Jerzy ^{[1
]}

机构：

[1] Gdansk University of Technology, Gdansk

来源：

Welding International | 2015年 / 29卷 / 07期

关键词：

D O I：

10.1080/09507116.2014.937596

中图分类号：

学科分类号：

摘要：

This article presents the results of a study on the influence of welding parameters for a local dry cavity underwater welding process on the properties of joints. The influence of the amount of heat input and the type of shielding gas on the structure and hardness of surfacing welds has been analysed. Analytical functions have been developed to facilitate the estimation of the maximum hardness in the heat-affected zone. © 2014, © 2014 Taylor & Francis.

引用

页码：530 / 537

页数：7

共 14 条

[1]

Hamsaki M., Sakakibara J., Underwater dry TIG welding using wire brush nozzle, (1983)

[2]

Lesinski K., Kielczynski W., Underwater welding technology by dry local cavity method, (1986)

[3]

Matsunawa A., Nishiguchi K., Okamoto I., Prediction of cooling rate and hardness of base metal in the underwater welding by local cavity process, (1983)

[4]

Labanowski J., Development of underwater welding techniques, Weld Rev Warsaw, 10, pp. 55-58, (2008)

[5]

Labanowski J., Fydrych D., Rogalski G., Underwater welding: a review, Advances in Materials Science, 8Issue 3, pp. 11-22, (2008)

[6]

Lesinski K., Development of underwater welding technology for butt joints of underwater structures using local dry cavity up to 200 m (2 MPa), (1987)

[7]

Puchaczewski N., Underwater welding – scope, requirements, evaluation criteria, (1985)

[8]

Rogalski G., Test stations for cutting and welding under water, (2002)

[9]

Pierozek B., Lasocinski J., Gas shielded arc welding of steel, (1987)

[10]

Christensen N., The metallurgy of underwater welding, (1983)

← 1 2 →