Experimental investigation of primary breakup in close-coupled gas atomization

被引:0
|
作者
Cheng, T. [1 ,2 ]
Leibovici, R. [1 ]
Kong, B. [2 ]
van Hout, R. [1 ]
机构
[1] Technion Israel Inst Technol, Dept Mech Engn, IL-3200003 Haifa, Israel
[2] Guangdong Technion Israel Inst Technol, Dept Chem Engn, Shantou 515063, Peoples R China
关键词
Close-coupled gas atomization; Primary breakup; Digital holography; Droplet distributions; LIQUID JET; NUMBER; DISTRIBUTIONS;
D O I
10.1016/j.ijmultiphaseflow.2024.105009
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Primary breakup of a liquid water jet in close-coupled gas atomization (CCGA) was studied using digital inline holography. Different nozzles with constant liquid protrusion length and characterized by three different apex angles,= = 14o, o , 24o o and 34o o were used. Measurements were conducted at two Weber numbers, We = 57.5 and 82.5. At each We, , five different momentum flux ratios, , were studied. A detailed analysis of the instantaneous liquid jet interfaces indicated that the "filming" occurred at a lower critical with increasing . Furthermore, with increasing , peak probabilities of interface lengths shifted to larger values while increasing led to increased maximum lengths. Fractal dimensions increased with downstream distance. Distributions of area-based droplet diameters spanned a broad size range up to 3 mm and were well described by least-squares fitted power laws, including an exponential cut-off. The highest number of droplets was generated at = = 24o o for = = 1.67 and 2.40 for We = 57.5 and 82.5, respectively. The percentage of circular droplets (based on a circularity-based threshold) was highest at = 14o o and decreased with increasing .
引用
收藏
页数:16
相关论文
共 50 条
  • [31] A study of liquid metal atomization using close-coupled nozzles, Part 1: Gas dynamic behavior
    Mates, SP
    Settles, GS
    ATOMIZATION AND SPRAYS, 2005, 15 (01) : 19 - 40
  • [32] Close-coupled gas atomization: High-frame-rate analysis of spray-cone geometry
    University of Leeds, Institute for Materials Research, Clarendon Road, Leeds, LS2 9JT, United Kingdom
    不详
    Int J Powder Metall (Princeton NJ), 2008, 1 (55-64):
  • [33] A study of liquid metal atomization using close-coupled nozzles, Part 2: Atomization behavior
    Mates, SP
    Settles, GS
    ATOMIZATION AND SPRAYS, 2005, 15 (01) : 41 - 59
  • [34] Close-coupled leveller
    不详
    INTERNATIONAL GAS ENGINEERING AND MANAGEMENT, 2000, 40 (03): : 30 - 30
  • [35] Estimation of Cooling Rates During Close-Coupled Gas Atomization Using Secondary Dendrite Arm Spacing Measurement
    Andrew M. Mullis
    Leane Farrell
    Robert F. Cochrane
    Nicholas J. Adkins
    Metallurgical and Materials Transactions B, 2013, 44 : 992 - 999
  • [36] Estimation of Cooling Rates During Close-Coupled Gas Atomization Using Secondary Dendrite Arm Spacing Measurement
    Mullis, Andrew M.
    Farrell, Leane
    Cochrane, Robert F.
    Adkins, Nicholas J.
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2013, 44 (04): : 992 - 999
  • [37] Experimental investigation of a supersonic close-coupled atomizer employing the phase Doppler measurement technique
    Apell, Niklas
    Tropea, Cameron
    Roisman, Ilia V.
    Hussong, Jeanette
    INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2023, 167
  • [38] CFD-BASED NUMERICAL SIMULATION OF GAS FLOW FIELD CHARACTERISTICS IN CLOSE-COUPLED VORTICAL LOOP SLIT GAS ATOMIZATION
    Zhang, M.
    Zhang, Z. M.
    Zhang, Y. Q.
    Lu, Y. J.
    ATOMIZATION AND SPRAYS, 2021, 31 (07) : 17 - 47
  • [39] Preparation of Fe-Cr Alloy Powder by Close-Coupled Vacuum Induction Melting Gas Atomization for Laser Cladding
    Yin Yan
    Dong Kaiji
    Li Zhiheng
    Li Zhihui
    Chai Xutian
    Zhang Ruihua
    CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG, 2021, 48 (14):
  • [40] Preparation of Fe-Cr Alloy Powder by Close-Coupled Vacuum Induction Melting Gas Atomization for Laser Cladding
    Yin Y.
    Dong K.
    Li Z.
    Li Z.
    Chai X.
    Zhang R.
    Zhongguo Jiguang/Chinese Journal of Lasers, 2021, 48 (14):