Experimental investigation on the effects of the high temperature and debonding on the modal characteristics of the composite honeycomb structure

被引：0

作者：

Bai Y. ^{[1
]}

Yu K. ^{[1
]}

Zhao R. ^{[1
]}

Zhao J. ^{[1
]}

Zhou H. ^{[1
]}

Yang Y. ^{[1
]}

Ma Y. ^{[2
]}

机构：

[1] Department of Astronautic Science and Mechanics, Harbin Institute of Technology, Harbin

[2] Beijing Aerospace Technology Institute, Beijing

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2018年 / 35卷 / 04期

关键词：

Composite structures; Debonding; High temperature; Honeycomb structures; Thermal modal tests; Thermal stress;

D O I：

10.13801/j.cnki.fhclxb.20170628.002

中图分类号：

学科分类号：

摘要：

Composite honeycomb plate is a class of important structure in the aerospace field. But it is rarely reported about the research on the modal characteristics of honeycomb structure in thermal environment. In this paper, modal tests on a plate composed by CF/epoxy laminates and Nomex honeycomb core were performed in six different temperature environments. During heating, the face sheet is debonded from the honeycomb core. Before delamination, natural frequencies of the plate decrease with the rising temperature. Among the first 7 modes, the decrease of the frequencies of bending modes is larger than that of the torsion modes. After debonding, the modal parameters of the plate at room temperature are quite different from the original structure. The modal damping ratio is significantly increased, and the order of two mode shapes is reversed. Lastly, the causes of the debonding of face sheet are analyzed and the conclusion is helpful to the structural design of composite honeycomb structures used in thermal environment. © 2018, Editorial Office of Acta Materiae Compositae Sinica. All right reserved.

引用

页码：885 / 895

页数：10

共 29 条

[1]

Boudjemai A., Amri R., Mankour A., Et al., Modal analysis and testing of hexagonal honeycomb plates used for satellite structural design, Materials & Design, 35, pp. 266-275, (2012)

[2]

Huang F., Chen C.Y., Natural frequency prediction and analysis of honeycomb sandwich plate with thermal load, Journal of Deep Space Exploration, 4, pp. 371-375, (2015)

[3]

Han J.Y., Yu K.P., Song H.Y., Et al., Study on the modeling methods of honeycomb sandwich panels based on fairing vibroacoustic experiments, Noise and Vibration Control, 35, 5, pp. 65-68, (2015)

[4]

Kant T., Arora C., Varaiya J., Finite element transient analysis of composite and sandwich plates based on a refined theory and a mode superposition method, Composite Structures, 22, 2, pp. 109-120, (1992)

[5]

Xu S.J., Song Y., Wang B.L., Et al., Investigation of dynamic behavior of orthotropic honeycomb sandwich plates, Acta Materiae Compositae Sinica, 15, 4, pp. 74-80, (1998)

[6]

Xu S.J., Kong X.R., Wang B.L., Et al., Method of equivalent analysis for statics and dynamics behavior of orthotropic honeycomb sandwich plates, Acta Materiae Compositae Sinica, 17, 3, pp. 92-95, (2000)

[7]

Guj L., Sestieri A., Dynamic modeling of honeycomb sandwich panel, Archive of Applied Mechanics, 77, 11, pp. 779-793, (2007)

[8]

Jiang D., Zhang D., Fei Q., Et al., An approach on identification of equivalent properties of honeycomb core using experimental modal data, Finite Elements in Analysis & Design, 90, 6, pp. 84-92, (2014)

[9]

C'nar O., Erdal M., Kayran A., Accurate equivalent models of sandwich laminates with honeycomb core and composite face sheets via optimization involving modal behavior, Journal of Sandwich Structures & Materials, 25, 1, pp. 3989-3998, (2015)

[10]

Wang P.P., Luo W.B., Zou J.X., Et al., Dynamic analysis of the carbon fiber honeycomb sandwich structure, Acta Materiae Compositae Sinica, 19, 6, pp. 134-136, (2002)

← 1 2 3 →