Investigation of the plant-side process parameters and evaluation of the cutting edge quality – Shear-cutting of Electrodes for Li-Ion-Cells

被引：0
作者：
Schabel S. [1 ]
Fleischer J. [1 ]
机构：
[1] Institut für Produktionstechnik Karlsruher Institut für Technologie (KIT), Kaiserstr. 12, Karlsruhe
来源：
WT Werkstattstechnik | 2022年 / 112卷 / 7-8期
关键词：
Compendex;
D O I：
10.37544/1436-4980-2022-7-8-41
中图分类号：
学科分类号：
摘要：
Battery production and the necessary raw materials are costintensive, which is why minimising production scrap is becoming increasingly important. During electrode assembly by shear cutting, waviness can occur in the cutting edge area, which negatively influence downstream process steps. For this purpose, process parameters on the equipment side are investigated to determine their correlation with the waviness and a procedure for quality assessment is implemented. © 2022, VDI Fachmedien GmBH & Co. KG. All rights reserved.
引用
收藏
页码：487 / 491
页数：4
相关论文
共 8 条
  • [1] Themenpapier Cluster Elektromobilität Süd-West, Die Produktionskette „Batteriesystem“ Und Kritische Ressourcen, (2022)
  • [2] Nationale Plattform Zukunft der Mobilität: 1, Zwischenbericht Zur Wertschöpfung, (2019)
  • [3] Zhang G., Wei X., Tang X., Et al., Internal short circuit mechanisms, experimental approaches and detection methods of lithium-ion batteries for electric vehicles: A review, Renewable and Sustainable Energy Reviews, 141, (2021)
  • [4] Kriegler J., Binzer M., Zaeh M.F., Process strategies for laser cutting of electrodes in lithium-ion battery production, Journal of Laser Applications 33, 1, (2021)
  • [5] Feiler M., Ein Beitrag Zur Klärung Der Vorgänge Beim Schneiden dünner flächiger Materialien, (1970)
  • [6] Roscher H.-J., Ebert L., Roscher M.A., Et al., Ultrasonic vibration assistance in shear cutting of electrode materials for lithium-ion batteries, Journal of Manufacturing Processes, 17, pp. 58-62, (2015)
  • [7] Baumeister M., Fleischer J., Feinstanzmodul für die Produktion von Lithium-Ionen-Batteriezellen, Zeitschrift für Wirtschaftlichen Fabrikbetrieb 109, 5, pp. 301-304, (2014)
  • [8] Geometrische Produktspezifikation (GPS)
1