Process optimization and microstructural development during superplastic-like forming of AA5083

被引：0
|
作者：
机构：
[1] Liu, Jun
[2] Tan, Ming-Jen
[3] Lim, Chao-Voon S.
[4] Chua, Beng-Wah
来源：
Tan, M.-J. (mmjtan@ntu.edu.sg) | 1600年 / Springer London卷 / 69期
关键词：
An advanced sheet forming process was utilized by combining hot drawing and blow forming to establish a fast forming technology. As a continuation of the development in superplastic-like forming; this study dealt with the process optimization and evaluation of post-forming properties. Aluminum alloy 5083 (AA5083) parts with near-net shape were successfully fabricated at 400 °C. Thickness uniformity has been improved by optimizing the mechanical preforming (hot drawing) and adopting a strain-rate-control gas forming (blow forming). Fairly uniform microstructure can be achieved with this forming process. To investigate the microstructural information; the annealed and hot deformed samples were characterized using electron backscatter diffraction technique. Fine grains with high-angle grain boundaries occurred near the elongated grains during hot drawing stage as a result of dynamic recrystallization. Subgrain structure was also examined by characterizing the distribution of grain boundary misorientation angles. Grain growth and subgrain boundary migration were two main microstructural features observed during the gas forming stage. © Springer-Verlag London 2013;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：9 / 12
相关论文
共 50 条
  • [31] Finite Element Modeling of a Non-Isothermal Superplastic-Like Forming Process
    Liu, Jun
    Tan, Ming-Jen
    Castagne, Sylvie
    Aue-u-lan, Yingyot
    Jarfors, Anders E. W.
    Fong, Kai-Soon
    Bayraktar, Emin
    INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS ONE AND TWO, 2010, 1315 : 377 - +
  • [32] Optimization and analysis of microstructural friction stir welded AA5083 grade aluminium alloy
    Muthurasu, P.
    Kathiresan, M.
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2021, 22 (06): : 697 - 704
  • [33] Deformation and failure of a superplastic AA5083 aluminum material with a Cu addition
    Green, W. Paul
    Kulas, Mary Anne
    Niazi, Amanda
    Oishi, Keiichiro
    Taleff, Eric M.
    Krajewski, Paul E.
    McNelley, Terry R.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (09): : 2727 - 2738
  • [34] Deformation and failure of a superplastic AA5083 aluminum material with a cu addition
    W. Paul Green
    Mary-Anne Kulas
    Amanda Niazi
    Eric M. Taleff
    Keiichiro Oishi
    Paul E. Krajewski
    Terry R. McNelley
    Metallurgical and Materials Transactions A, 2006, 37 : 2727 - 2738
  • [35] Development of the superplastic 5083 alloy sheet suitable for the cold pre-forming superplastic forming process
    Matsuo, M
    Tagata, T
    Matsumoto, N
    THERMEC '97 - INTERNATIONAL CONFERENCE ON THERMOMECHANICAL PROCESSING OF STEELS AND OTHER MATERIALS, VOLS I-II, 1997, : 1953 - 1959
  • [36] Effect of GTAW process parameters on weld characteristics and microstructural studies of dissimilar welded joints of AA5083 and AA6082: optimization technique
    Ajit Kumar Yadav
    Manoj Kr. Agrawal
    Kuldeep K. Saxena
    Balram Yelamasetti
    International Journal on Interactive Design and Manufacturing (IJIDeM), 2024, 18 : 1151 - 1160
  • [37] Effect of GTAW process parameters on weld characteristics and microstructural studies of dissimilar welded joints of AA5083 and AA6082: optimization technique
    Yadav, Ajit Kumar
    Agrawal, Manoj Kr.
    Saxena, Kuldeep K.
    Yelamasetti, Balram
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (03): : 1151 - 1160
  • [38] Superplastic Differential Temperature and Isothermal Deep Drawing Experiment of AA5083 Alloy
    Xu Xuefeng
    Wang Gaocao
    Dong Hongbo
    2011 3RD WORLD CONGRESS IN APPLIED COMPUTING, COMPUTER SCIENCE, AND COMPUTER ENGINEERING (ACC 2011), VOL 2, 2011, 2 : 443 - 449
  • [39] Formability and cavitation behavior of superplastic AA5083 aluminum alloy under biaxial tension
    Luo Ying-bing
    Li Da-yong
    Peng Ying-hong
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2006, 16 : S1630 - S1633
  • [40] CHARACTERISTICS OF THE GBS-SDC TRANSITION DURING BI-AXIAL FORMING OF AA5083
    McNelley, Terry
    Oh-Ishi, Keiichiro
    Swaminathan, Srinivasan
    Bradley, John
    Krajewski, Paul
    Taleff, Eric
    SUPERPLASTICITY IN ADVANCED MATERIALS, 2013, 735 : 43 - +
12345