Open loop-closed loop compound control algorithm of proportional solenoid valve

被引:0
作者
Hao, Yunzhi [1 ]
Xue, Rongsheng [1 ]
Chen, Jian [2 ]
Zhou, Qian [1 ]
机构
[1] Intelligent Transmission and Control Laboratory, Southwest University
[2] College of Engineering, Southwest University
来源
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2014年 / 45卷 / 02期
关键词
Compound control; Open loop control; Pressure; Solenoid valve;
D O I
10.6041/j.issn.1000-1298.2014.02.052
中图分类号
学科分类号
摘要
In order to quickly establish a pressure control algorithm with good performance for proportional solenoid valve, a compound control algorithm with the combination of open loop control and closed loop control was presented. The algorithm improved the control performance by making full use of the valve response characteristics. Control algorithm design process and control models were established. Unlike the conventional control methods which took the error as the only input, the input of compound control algorithm consisted of both the goal value and the error value. Valve respond characteristics were tested. The open loop control table was established based on the steady-state characteristics of the valve and the saturation in steady-state was eliminated by the open loop control table. The closed loop control value and delay effect compensate value were calculated according to the transient characteristics and the closed loop controller was used to revise the model error and improve the dynamic response. Experiment results showed that the performance of compound control algorithm was accurate, fast response and robust.
引用
收藏
页码:314 / 319
页数:5
相关论文
共 22 条
  • [1] Lang C., Wang J., Wang J., Et al., Variable fertilizer control system for deep-fertilization liquid fertilizer applicator, Transactions of the Chinese Society for Agricultural Machinery, 44, 2, (2013)
  • [2] Wrachien D.D., Lorenzini G., Modelling jet flow and losses in sprinkler irrigation: Overview and perspective of a new approach, Biosystems Engineering, 94, 2, pp. 297-309, (2006)
  • [3] Sourell H., Faci J.M., Playan E., Performance of rotating spray plate sprinklers in indoor experiments, Journal of Irrigation and Drainage Engineering, 129, 5, pp. 376-380, (2003)
  • [4] Wei X., Jiang S., Zhang J., Et al., Application rate control characteristics of blended pulse variable rate application system, Transactions of the Chinese Society for Agricultural Machinery, 44, 2, (2013)
  • [5] Liu J., Yuan S., Li H., Et al., Experiments of hydraulic performance for variable complete fluidic sprinkler, Transactions of the Chinese Society for Agricultural Machinery, 44, 2, pp. 75-79, (2013)
  • [6] Li M., Song Z., Chi R., Et al., Simulation analysis on proportional lowering valve for high-power tractor, Transactions of the Chinese Society for Agricultural Machinery, 43, S, pp. 1-5, (2012)
  • [7] Xu Z., Wang X., Luo Y., Design and simulation of a high pressure proportional pneumatic pressure reducing valve, Transactions of the Chinese Society for Agricultural Machinery, 42, 1, (2011)
  • [8] Jin Y., Xiang C., Ma Y., Optimization on dynamic performance of pressure-regulating valve of tractor-brake hydraulic torque converter, Transactions of the Chinese Society for Agricultural Machinery, 41, 5, pp. 12-16, (2010)
  • [9] Liu J., Tan Y., Xu H., Et al., Dynamic performance simulation and optimization of speed ratio control valve in continuously variable transmission, Transactions of the Chinese Society for Agricultural Machinery, 41, 3, pp. 6-10, (2010)
  • [10] Wang Y., Liu F., Liu X., Control strategy of high-pressure two-actuator fuel injection system, Transactions of the Chinese Society for Agricultural Machinery, 43, 1, pp. 28-32, (2012)