Kinetics of methane hydrate formation in saline droplets/copper foam composite system

被引：0
作者：
Xu, Hongbiao [1 ,2 ]
Yang, Liang [1 ,2 ]
Li, Zidong [1 ,2 ]
Liu, Daoping [1 ,2 ]
机构：
[1] School of Energy and Power Engineering, University of Shanghai for Science and Technology, Shanghai
[2] Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering, Shanghai
来源：
Huagong Xuebao/CIESC Journal | 2024年 / 75卷 / 09期
关键词：
copper foam; formation kinetics; methane hydrate; promotion; saline droplets;
D O I：
10.11949/0438-1157.20240254
中图分类号：
学科分类号：
摘要：
Improving seawater hydration storage rate and storage density is crucial for the large-scale application of hydrate technology. A certain concentration of NaCl solution was dispersed with hydrophobic fumed nanosilica by high-speed stirring into micrometer-sized saline droplets. Under the conditions of 8.0 MPa and 274.15 K, methane hydrate storage experiments were conducted by using saline droplets with different silicon contents to study the kinetic characteristics of methane hydrate formation. With a gas storage capacity of 141.01 cm3·cm-3 and a gas storage rate of 7.37 cm3·cm-3·min-1, saline droplets with a silicon content of 2.5 %(mass) demonstrated the best dispersibility and gas storage performance, according to the data. The silicon-containing brine droplets are further filled into the open-pore copper foam to construct a saline droplet/copper foam composite hydration gas storage system. It is discovered that the three-dimensional nested metal framework of copper foam can significantly accelerate the transfer of hydration reaction heat and improve the gas storage performance of saline droplets hydration. At 5.0—8.0 MPa, compared to the saline droplets single system, the hydration gas storage capacity of the composite system is increased by 4.72%—21.70%, and the maximum gas storage rate is increased by 38.25%—110.58%. © 2024 Materials China. All rights reserved.
引用
收藏
页码：3287 / 3296
页数：9
相关论文
共 41 条
  • [1] Sloan E D., Fundamental principles and applications of natural gas hydrates, Nature, 426, 6964, pp. 353-363, (2003)
  • [2] Hao W F, Wang J Q, Fan S S, Et al., Evaluation and analysis method for natural gas hydrate storage and transportation processes, Energy Conversion and Management, 49, 10, pp. 2546-2553, (2008)
  • [3] Kumar R, Linga P, Moudrakovski I, Et al., Structure and kinetics of gas hydrates from methane/ethane/propane mixtures relevant to the design of natural gas hydrate storage and transport facilities, AIChE Journal, 54, 8, pp. 2132-2144, (2008)
  • [4] Chen G J, Sun C Y, Ma Q L., Gas Hydrate Science and Technology, (2008)
  • [5] Li C X, Yang L, Liu D P, Et al., Accelerated methane storage in clathrate hydrates using the natural tobacco, Energy, 241, (2022)
  • [6] Veluswamy H P, Kumar A, Seo Y, Et al., A review of solidified natural gas (SNG) technology for gas storage via clathrate hydrates, Applied Energy, 216, pp. 262-285, (2018)
  • [7] Koh C A, Sloan E D., Natural gas hydrates: recent advances and challenges in energy and environmental applications, AIChE Journal, 53, 7, pp. 1636-1643, (2007)
  • [8] Boswell R, Collett T S., Current perspectives on gas hydrate resources, Energy & Environmental Science, 4, 4, pp. 1206-1215, (2011)
  • [9] Chong Z R, Yang S H B, Babu P, Et al., Review of natural gas hydrates as an energy resource: prospects and challenges, Applied Energy, 162, pp. 1633-1652, (2016)
  • [10] Yang L, Li C X, Pei J H, Et al., Enhanced clathrate hydrate phase change with open-cell copper foam for efficient methane storage, Chemical Engineering Journal, 440, (2022)
12345