Damage Degree Recognition of Bearing Based on Correlation Analysis and Lempel-Ziv Index

被引:0
|
作者
Yin J. [1 ]
Xu M. [1 ]
机构
[1] Deep Space Exploration Research Center, Harbin Institute of Technology, Harbin
来源
Zhendong Ceshi Yu Zhenduan/Journal of Vibration, Measurement and Diagnosis | 2019年 / 39卷 / 02期
关键词
Bearing; Correlation analysis; Damage degree; Inner ring; Outer ring;
D O I
10.16450/j.cnki.issn.1004-6801.2019.02.025
中图分类号
学科分类号
摘要
For the damage degree recognition of bearing inner and outer ring under the single failure mode, an evaluation method based on the Lempel-Ziv index and correlation analysis is proposed. The influence of noise on Lempel-Ziv index is reduced by correlation analysis on the basis of retaining frequency components in the signal. Firstly, the autocorrelation analysis of the original signal is used to reduce the noise component of the signal. Secondly, the coding sequence of the original signal is obtained by 0-1 encoding of the noise reduction signal. Finally the sequence after coding is used to calculate the Lempel-Ziv index to get the signal complexity. The effectiveness of the proposed method is verified by simulation and experimental data. Compared with the traditional Lempel-Ziv complexity and the Lempel-Ziv complexity after filtering, the proposed method can identify the bearing fault signal complexity in the noise environment, which can effectively distinguish the damage degree of the bearing inner and outer ring under the single failure mode. © 2019, Editorial Department of JVMD. All right reserved.
引用
收藏
页码:396 / 403
页数:7
相关论文
共 22 条
  • [1] Yoshioka T., Shimizu S., Monitoring of ball bearing operation under grease lubrication using a new compound diagnostic system detecting vibration and acoustic emission, Tribology Transactions, 52, 6, pp. 725-730, (2008)
  • [2] Tyagi S., A Comparative study of SVM classifiers and artificial neural networks application for rolling element bearing fault diagnosis using wavelet transform preprocessing, Proceedings of World Academy of Science Engineering and Technolog, 45, pp. 309-317, (2008)
  • [3] Jantunen E., How to diagnose the wear of rolling element bearings based on indirect condition monitoring methods, International Journal of Comadem, 9, 3, pp. 24-38, (2006)
  • [4] Dyer D., Stewart R.M., Detection of rolling element bearing damage by statistical vibration analysis, Journal of Mechanical Design, 100, 2, (1978)
  • [5] Mcfadden P.D., Smith J.D., Vibration monitoring of rolling element bearings by the high-frequency resonance technique-a review, Tribology International, 17, 84, pp. 3-10, (1984)
  • [6] Kankar P.K., Sharma S.C., Harsha S.P., Rolling element bearing fault diagnosis using wavelet transform, Neurocomputing, 74, 10, pp. 1638-1645, (2011)
  • [7] Yu Y., Yu D., Cheng J., A roller bearing fault diagnosis method based on EMD energy entropy and ANN, Journal of Sound and Vibration, 294, 1, pp. 269-277, (2006)
  • [8] Li Y., Xu M., Wei Y., Et al., An improvement EMD method based on the optimized rational Hermite interpolation approach and its application to gear fault diagnosis, Measurement, 63, pp. 330-345, (2015)
  • [9] Lempel A., Ziv J., On the complexity of finite sequences, IEEE Transactions on Information Theory, 22, 1, pp. 75-81, (1976)
  • [10] Mateo A., Roberto H., Daniel A., Et al., Interpretation of the Lempel-Ziv complexity measure in the context of biomedical signal analysis, IEEE Transactions on Biomedical Engineering, 53, 11, pp. 2282-2288, (2006)