Effect of concentric and eccentric porous layers on forced convection heat transfer and fluid flow around a solid cylinder

被引：0
作者：
Alinezhad A. [1 ]
Goharrizi A.S. [1 ]
Kamyabi A. [1 ]
机构：
[1] Department of Chemical Engineering, Faculty of Engineering, Shahid Bahonar University of Kerman, Kerman
来源：
Journal of Computational and Applied Research in Mechanical Engineering | 2024年 / 13卷 / 02期
关键词：
Cross-flow; Darcy number; Eccentricity; Porous media; Volume averaged equation;
D O I：
10.22061/jcarme.2024.8784.2182
中图分类号：
学科分类号：
摘要：
In this paper, heat transfer and fluid flow around a solid cylinder wrapped with a porous layer in the channel were studied numerically by computational fluid dynamics. The homogeneous concentric and eccentric porous medium around a rigid and solid cylinder is supposed at local thermal equilibrium. The transport phenomena within the porous layer and volume-averaged equations were employed; however, the conservation laws of mass, momentum and energy were applied in the channel. The main purpose of this study is to analyze and compare the heat flux of concentric and eccentric porous layer in the Reynolds number range of 1 to 40 and Darcy numbers of 10-2 to 10-6. It is found that with the decline of Darcy number, the vortex length is increased behind the solid cylinder surface. In addition, the heat flux rate of the cylinder is raised with the increase of Reynolds number. Finally, the results showed that the average Nusselt numbers in different Darcy and Reynolds numbers are higher in the eccentric porous layer than in the concentric porous layer. For example, our findings show that in, and, the average Nusselt number in the eccentric porous layer is higher than the concentric porous layer. © 2024 The author(s).
引用
收藏
页码：191 / 206
页数：15
相关论文
共 26 条
  • [1] Bhattacharyya S., Dhinakaran S., A. Chem. Eng. Sci, 61, 13, (2006)
  • [2] Bhattacharyya S., Singh A. K., solid cylinder wrapped with a porous, Int. J. Heat Mass Transfer, 52, 7-8, (2009)
  • [3] Rashidi S., Tamayol A., M. S. Valipour convection heat transfer around a solid, Int. J. Heat Mass Transfer, 63, 5, (2013)
  • [4] Alinezhad A., Khatibi M., Ashrafizadeh S. N., Impact of asymmetry soft layers and ion partitioning on ionic current rectification in bipolar nanochannels, J. Mol. Liq, 347, 3, (2022)
  • [5] Alinezhad A., Alinezhad A., Influence of location junction on ion transfer behavior in conical nanopores with bipolar polyelectrolyte brushes, Electrochimica Acta, 425, 2, (2022)
  • [6] Alinezhad A., Khatibi M., Ashrafizadeh S. N., Ionic transfer behavior of bipolar nanochannels resembling PNP nanotransistor, Electrochimica Acta, 460, 2, (2023)
  • [7] Baghel D. K., Sinha S. L., S. K.-heat transfer assessment in an infant, J. Comput. Appl. Res. Mech. Eng, 12, 2, pp. 161-175, (2023)
  • [8] Madani S. M. M., Alinejad J., Y. Boltzmann simulation inside a cavity: The effect of pipe profile on natural, J. comput. Appl. Res. Mech. Eng, 13, 1, pp. 67-74, (2023)
  • [9] Sadegh Valipour M., Zare Ghadi A., convective heat transfer around and through a porous circular cylinder with, J. Heat Transfer, 134, 6, (2012)
  • [10] Rong F. M., Guo Z. L., Lu J. H., B. around a porous covering square cylinder in a channel via lattice Boltzmann, Int. J. Numer. Methods Fluids, 65, 10, pp. 1217-1230, (2011)
123