Design of the intermediate heat exchanger for the high temperature gas-cooled reactor hydrogen cogeneration system, (I) - selection of the specification of heat exchanger tube and evaluation of the primary stress

被引：0
作者：
Kato, Ryoma [1 ]
Nishihara, Tetsuo [1 ]
Kunitomi, Kazuhiko [1 ]
机构：
[1] Japan Atomic Energy Agency, Ibaraki 311-1393, 4002 Narita-cho, Oarai-machi
来源：
Transactions of the Atomic Energy Society of Japan | 2007年 / 6卷 / 02期
关键词：
Conceptual design; Heart transfer calculation; High temperature gas-cooled reactor; IHX; Primary stress evaluation; Shell & tube;
D O I：
10.3327/taesj.J06.023
中图分类号：
学科分类号：
摘要：
Japan Atomic Energy Agency (JAEA) has been carrying out design studies of the Gas Turbine High Temperature Reactor 300 for Cogeneration (GTHTR300C). One of the key components in the GTHTR300C is an intermediate heat exchanger (IHX). The IHX for the GTHTR300C is rated 170MWt and designed on the basis of the shell & tube type IHX adopted in the High Temperature engineering Test Reactor (HTTR). As a conceptual design, we selected the heat exchanger tube size which is based on heat transfer calculation, designed conceptual structure, and evaluated the primary stress in design condition. By the results of this study, the technical feasibility of the large size shell & tube type IHX for the GTHTR300C was verified. © Atomic Energy Society of Japan.
引用
收藏
页码：141 / 148
页数：7
相关论文
共 7 条
  • [1] Kunitomi K., Yan X., Minatsuki I., Deployment of GTHTR300 Cogeneration for hydrogen and electric generation, Proc. ICAPP' 04, (2004)
  • [2] Kunitomi K., Yan X., Shiozawa S., Et al., GTHTR300C for hydrogen cogeneration, Proc. HTR2004, (2004)
  • [3] JAERI-M, 92-147, (1992)
  • [4] JAERI-M, 85-182, (1985)
  • [5] ASME Boiler and Pressure Vessel Code Section III Division 1 Subsection NB Class 1 Components, (1986)
  • [6] ASME Boiler and Pressure Vessel Code Section III Division 1 Subsection NH Class 1 Components in Elevated Temperature Service, (1986)
  • [7] JAERI-M, 90-148, (1990)
1