Probabilistic analysis for characteristic values of fracture toughness

被引：0
|
作者：
Institute of Process Equipment and Control Engineering, Zhejiang University of Technology, Hangzhou [1 ]
310032, China
机构：
来源：
Hedongli Gongcheng | / 5卷 / 132-135期
关键词：
D O I：
10.13832/j.jnpe.2015.05.0132
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [41] Study of mixed mode fracture toughness and fracture characteristic in gypsum rock under brine saturation
    Tao Meng
    Xiankai Bao
    Jinchang Zhao
    Yaoqing Hu
    Environmental Earth Sciences, 2018, 77
  • [42] DETERMINATION OF CHARACTERISTIC FRACTURE MECHANICAL VALUES OF MATERIALS FOR 3-POINT BEND SPECIMENS IN MATERIAL-TOUGHNESS TRANSITION-RANGES
    SUN, GX
    ROOS, E
    EISELE, U
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 1992, 23 (07) : 250 - 259
  • [43] EVALUATION OF LOWER BOUND FRACTURE-TOUGHNESS VALUES USING WEIBULL ANALYSIS OF SINGLE SPECIMEN DATA
    DOIG, P
    ENGINEERING FRACTURE MECHANICS, 1985, 21 (05) : 963 - 967
  • [44] A coupled FFM model to interpret fracture toughness values for brittle materials
    Firrao, Donato
    Matteis, Paolo
    Sapora, Alberto
    Cornetti, Pietro
    Carpinteri, Alberto
    21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21), 2016, 2 : 1983 - 1990
  • [45] FURTHER REMARKS ON OBTAINING FRACTURE-TOUGHNESS VALUES FROM THE LITERATURE
    ASSAAD, AT
    SINCLAIR, GB
    INTERNATIONAL JOURNAL OF FRACTURE, 1988, 38 (03) : R47 - R60
  • [46] Geometry independent fracture mechanics values - Requierenent for toughness characterization of polymers
    Grellmann, W
    Seidler, S
    Lach, R
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2001, 32 (06) : 552 - 561
  • [47] PROCEDURE FOR DETERMINING BOUNDING VALUES ON FRACTURE TOUGHNESS KIC AT ANY TEMPERATURE
    WITT, FJ
    NUCLEAR ENGINEERING AND DESIGN, 1971, 17 (01) : 174 - +
  • [48] Use of Instrumented Charpy Impact Tests for the Determination of Fracture Toughness Values
    Herold, H.
    Streitenberger, M.
    Cammarota, G. P.
    Casagrande, A.
    Morri, A.
    Garagnani, G.
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2010, 47 (01): : 34 - 44
  • [49] Fracture toughness values obtained from tensile tests on unnotched specimens
    Schmelzer, Peter
    Schneeweiss, Guenther
    Varga, Thomas
    Materialpruefung/Materials Testing, 1998, 40 (1-2): : 34 - 38
  • [50] Can microscale fracture tests provide reliable fracture toughness values? A case study in silicon
    Jaya, Balila Nagamani
    Kirchlechner, Christoph
    Dehm, Gerhard
    JOURNAL OF MATERIALS RESEARCH, 2015, 30 (05) : 686 - 698
12345