Effect of silicon and aluminum on microstructure and properties of laser cladding MoFeCrTiW high-entropy alloy coating

被引：0
作者：
Zhou, Fang [1 ,2 ]
Liu, Qibin [1 ,2 ]
Zheng, Bo [1 ]
机构：
[1] School of Materials and Metallurgy, Guizhou University, Guiyang
[2] Key Laboratory for Material Structure and Strength, Guiyang
来源：
Qiangjiguang Yu Lizishu/High Power Laser and Particle Beams | 2015年 / 27卷 / 11期
关键词：
High-entropy alloy coatings; High-temperature oxidation resistance; Laser cladding; Wear resistance;
D O I：
10.11884/HPLPB201527.119001
中图分类号：
学科分类号：
摘要：
In order to improve the wear resistance and high-temperature oxidation resistance of materials surface, MoFeCrTiW high-entropy alloy coating, named MoFeCrTiW HEA coating, was fabricated on Q235 steel by laser cladding. The effect of silicon and aluminum on the microstructure, phase, wear resistance and high-temperature oxidation resistance were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and wear tester. The results show that the microstructure of MoFeCrTiW HEA cladding coating is composed of equiaxed grains. After adding equimolar silicon or aluminum respectively, the microstructure of coating is eutectic or dendrites. The microstructure consists of fine equiaxed grains when adding equimolar silicon and aluminum simultaneously. The main phase of HEA coatings is BCC structure. With the addition of silicon and aluminum, the lattice constants of BCC are reduced. Adding equimolar aluminum can contribute to restrain the formation of intermetallic compound and decrease the wear resistance of coatings, whereas adding equimolar silicon can promote the formation of intermetallic compound and some unknown phases, then the wear resistance of coatings can be increased. MoFeCrTiW HEA cladding coating exhibits high oxidation resistance at 800℃, the high temperature oxidation of coatings can be further increased after adding silicon and aluminum. © 2015, Editorial Office of High Power Laser and Particle Beams. All right reserved.
引用
收藏
页数：6
相关论文
共 22 条
  • [1] Zhang H., Zou Y., Zou Z., Et al., Effect of Cr on corrosion and wear resistances of TiC-VC reinforced ferrite-based laser cladding coatings, High Power Laser and Particle Beams, 26, (2014)
  • [2] Zheng B., Hu W., Enhanced wear property of magnesium alloy with Al+SiC coating by laser cladding, High Power Laser and Particle Beams, 26, (2014)
  • [3] Yeh J.W., Chen S.K., Lin S.J., Et al., Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes, Advanced Engineering Materials, 6, 5, pp. 299-303, (2004)
  • [4] Xu X.D., Liu P., Guo S., Et al., Nanoscale phase separation in a fcc-based CoCrCuFeNiAl<sub>0.5</sub> high-entropy alloy, Acta Materialia, 84, pp. 145-152, (2015)
  • [5] Liu W.H., He J.Y., Huang H.L., Et al., Effects of Nb additions on the microstructure and mechanical property of CoCrFeNi high-entropy alloys, Intermetallics, 60, pp. 1-8, (2015)
  • [6] Wang L.M., Chen C.C., Yeh J.W., Et al., The microstructure and strengthening mechanism of thermal spray coating Ni<sub>x</sub>Co<sub>0.6</sub>Fe<sub>0.2</sub>CrySi<sub>2</sub>AlTi<sub>0.2</sub> high-entropy alloys, Materials Chemistry and Physics, 126, 3, pp. 880-885, (2011)
  • [7] Yao C.Z., Zhang P., Liu M., Et al., Electro-chemical preparation and magnetic study of Bi-Fe-Co-Ni-Mn high entropy alloy, Electrochimica Acta, 53, pp. 8359-8365, (2008)
  • [8] Braeckman B.R., Boydens F., Hidalgo H., Et al., High entropy alloy thin films deposited by magnetron sputtering of powder targets, Thin Solid Films, 580, 1, pp. 71-76, (2015)
  • [9] Zhang H., Pan Y., He Y., Laser cladding FeCoNiCrAl<sub>2</sub>Si high-entropy alloy coating, Acta Metallurgica Sinica, 47, 8, pp. 1075-1079, (2011)
  • [10] Zhang H., Pan Y., He Y.Z., Et al., Microstructure and properties of 6FeNiCoSiCrAlTi high-entropy alloy coating prepared by laser cladding, Applied Surface Science, 257, pp. 2259-2263, (2011)
123