Dual ORC-Brayton power system for waste heat recovery in heavy-duty vehicles

被引:0
作者
Cholewiński M. [1 ]
Pospolita W. [2 ]
Błoński D. [1 ]
机构
[1] Wroclaw University of Technology, Faculty of Mechanical and Power Engineering, Department of Energy Technologies, Turbines and Modelling of Thermal and Fluid Flow Processes, Wroclaw
[2] Wroclaw University of Technology, Faculty of Mechanical and Power Engineering, Department of Mechanics and Power Systems, Wrocław
关键词
Brayton cycle; Energy efficiency; Organic Rankine cycle; Road transport; Waste heat utilization;
D O I
10.5604/08669546.1225446
中图分类号
学科分类号
摘要
Reducing the amount of energy required in industrial activities is one of the proven ways to achieve major cost savings, especially in the face of soaring energy prices. In the transport sector, besides the financial benefits, low energy consumption leads to the significant reduction of emissions of many pollutants. In this paper the new concept of dual power technology, dedicated to heavy road transport, was modelled and analysed by computer simulations. The combination of organic Rankine cycle and Brayton cycle was proposed, where the waste heat of fumes was recognized as a upper heat source, whereas the surrounding was adopted to be the lower one. Improvement of total energy conversion efficiency of the truck was the key success factor. Environmental friendly fluids (air and R123) were utilised. The operating parameters, power characteristics and energy streams (i.e. dispersion) of the system were evaluated, calculated and commented from the perspective of its theoretical profitability. The calculated net power capacity of analysed dual system was around 50 hp for 100% load. However, when the engine load is below 50% of nominal capacity, the power generation of combined system might be lower than in the case of single ORC system. © 2016, Warsaw University of Technology. All rights reserved.
引用
收藏
页码:7 / 19
页数:12
相关论文
共 27 条
[1]  
Aghaali H., Angstrom H.-E., A review of turbocompounding as a waste heat recovery system for internal combustion engines, Renewable and Sustainable Energy Reviews, 49, 2015, pp. 813-824, (2015)
[2]  
Arnold S., Slupski K., Groskreutz M., Vrbas G., Cadle R., Shahed S.M., Advanced Turbocharging Technologies for Heavy-Duty Diesel Engines, SAE Technical Paper 2001-01-3260, (2001)
[3]  
Bang G., Kim B., Youn N., Kim Y.K., Wee D., Economic and Environmental Analysis of Thermoelectric Waste Heat Recovery in Conventional Vehicles Operated in Korea: A Model Study, Journal of Electronic Materials, 45, 3, pp. 1956-1965, (2016)
[4]  
Road Transport in Poland in the Years 2012, 2013, (2015)
[5]  
Transport. Activity Results in 2012, (2013)
[6]  
Chlopek Z., The assessment of the pollutant emission from the self ignition engine in its different operating states, Archives of Transport, 29, 1, pp. 7-16, (2014)
[7]  
Costall A.W., Gonzalez Hernandez A., Newton Pp.J., Martinez-Botas R.F., Design methodology for radial turbo expanders in mobile organic, Applied Energy, 157, pp. 729-743, (2015)
[8]  
Golinski J.A., Jesionek K.J., Siłownie Powietrzno - Parowe, (2009)
[9]  
Han S., Seo J.B., Choi B.S., Development of a 200 kW ORC radial turbine for waste heat recover, Journal of Mechanical Science and Technology, 28, 12, pp. 5231-5241, (2014)
[10]  
Kang S.H., Design and preliminary tests of ORC (organic Rankine cycle) with two-stage radial turbine, Energy, 96, pp. 142-154, (2016)