Flame retardancy of epoxy resin doped with pentaerythritol diphosphonate melamine-urea-formaldehyde resin salt

被引:0
|
作者
Gao, Ming
Li, Gui-Fen
Yang, Rong-Jie
机构
[1] School of Material Science and Engineering, Beijing Institute of Technology, Beijing 100081, China
[2] Department of Environmental Engineering, North China Institute of Science and Technology, Sanhe 065201, China
关键词
D O I
暂无
中图分类号
学科分类号
摘要
Pentaerythritol diphosphonate melamine-urea-formaldehyde resin salt, a novel cheap macromolecular intumescent flame retardants (IFR), was synthesized, and its structure was a caged bicyclic macromolecule containing phosphorus characterized by FT-IR, which was applied to epoxy resin (EP). The thermal behavior and flame retardancy of samples were determined by TG-DTG and cone calorimeter (CONE). Activation energy for the decomposition of samples was obtained using the Broido equation. The resultant data show that for the flame retardant doped EP, average value of heat release rate is decreased by 30.7%, total heat release decreased by 52.2%, smoke and gas release decreased by 42.7%, CO release decreased by 70.5%, CO2 release decreased by 76.5%, and char yield is increased by 19.1%. 30% weight of IFR is doped into EP to get 30.5 of the limiting oxygen index, whose flame retardancy is similar to DOPO. The activation energy for the decomposition of EP is 76.5 kJ/mol while it becomes 86.5 kJ/mol when IFR is doped into, decreased by 10 kJ/mol, which shows that IFR can catalyze decomposition and carbonization of EP.
引用
收藏
页码:182 / 186
相关论文
共 50 条
  • [21] Speciation of Cr(III) and Cr(VI) by means of melamine-urea-formaldehyde resin and FAAS
    Demirata, B
    MIKROCHIMICA ACTA, 2001, 136 (3-4) : 143 - 146
  • [22] Speciation of Cr(III) and Cr(VI) by Means of Melamine-Urea-Formaldehyde Resin and FAAS
    Birsen Demirata
    Microchimica Acta, 2001, 136 : 143 - 146
  • [23] Effects of polyethylene glycol on the flexibility of cold-setting melamine-urea-formaldehyde resin
    Zhang, Bengang
    Wu, Zhigang
    Liang, Jiankun
    Yu, Liping
    Xi, Xuedong
    Lei, Hong
    Du, Guanben
    EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2022, 80 (04) : 975 - 984
  • [24] Effect and mechanism of modification of particle-gypsum composites with melamine-urea-formaldehyde resin
    Yue K.
    Liang B.
    Zhao M.
    Tang Z.
    Wang F.
    Liu J.
    Liu W.
    Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2020, 36 (06): : 300 - 307
  • [25] Flame retardancy mechanisms of melamine cyanurate in combination with aluminum diethylphosphinate in epoxy resin
    Chen, Wenhua
    Liu, Pengju
    Cheng, Yanbo
    Liu, Yuan
    Wang, Qi
    Duan, Wenfeng
    JOURNAL OF APPLIED POLYMER SCIENCE, 2019, 136 (12)
  • [26] Variation of Reaction Stages And Mole Composition Effect on Melamine-Urea-Formaldehyde (MUF) Resin Properties
    Bono, Awang
    Krishnaiah, Duduku
    Rajin, Mariani
    Siambun, Nancy J.
    NEW DEVELOPMENT AND APPLICATION IN CHEMICAL REACTION ENGINEERING, 4TH ASIA-PACIFIC CHEMICAL REACTION ENGINEERING SYMPOSIUM (APCRE 05), 2006, 159 : 713 - 716
  • [27] MONTMORILLONITE NANOPARTICLE DISTRIBUTION AND MORPHOLOGY IN MELAMINE-UREA-FORMALDEHYDE RESIN-IMPREGNATED WOOD NANOCOMPOSITES
    Cai, Xiaolin
    Riedl, Bernard
    Wan, Hui
    Zhang, S. Y.
    WOOD AND FIBER SCIENCE, 2010, 42 (03): : 285 - 291
  • [28] Testing by fourier transform infrared species variation during melamine-urea-formaldehyde resin preparation
    Kandelbauer, A.
    Despres, A.
    Pizzi, A.
    Taudes, I.
    Journal of Applied Polymer Science, 2007, 106 (04): : 2192 - 2197
  • [29] Testing by Fourier transform infrared species variation during melamine-urea-formaldehyde resin preparation
    Kandelbauer, A.
    Despres, A.
    Pizzi, A.
    Taudes, I.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2007, 106 (04) : 2192 - 2197
  • [30] A study on the curing and viscoelastic characteristics of melamine-urea-formaldehyde resin in the presence of aluminium silicate nanoclays
    Cai, Xiaolin
    Riedl, Bernard
    Wan, Hui
    Zhang, S. Y.
    Wang, Xiang-Ming
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2010, 41 (05) : 604 - 611