Ablation resistance property of nitride filled polytetrafluoroethylene composites based on CO2 continuous laser simulation

被引：0

作者：

Chen, Zhuo ^{[1
]}

Zhang, Hui ^{[1
]}

Yuan, Duanpeng ^{[2
]}

Hao, Liucheng ^{[2
]}

Zhang, Zhong ^{[1
]}

机构：

[1] Laboratory for Nanomanufacture and Applications, National Center for Nanoscience and Technology, Beijing

[2] High Voltage Switch Insulating Materials Laboratory of State Grid, Pinggao Group Co. Ltd., Pingdingshan

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2015年 / 32卷 / 05期

关键词：

Ablation resistance; Laser ablation; Nitride; Polytetrafluoroethylene; Thermal conductivity;

D O I：

10.13801/j.cnki.fhclxb.20150327.002

中图分类号：

学科分类号：

摘要：

In order to improve the arc-resistance ablation property of polytetrafluoroethylene (PTFE) nozzle composites of high voltage circuit breaker, micro or nano size boron nitride (BN) or aluminium nitride (AlN) with different ratios were dispersed into PFTE matrix. CO2 continuous laser was used for ablating PTFE nozzle material to simulate electric arc ablation process. The effects of light reflectance, thermal conductivity and relative dielectric constants on ablation amount were analyzed. By comparing ablation amount of composites and numerical analytical results, the key factors affecting ablation amount are thermal parameters of materials (thermal conductivity and thermal diffusion coefficient). BN/PTFE composites have higher ablation resistance property compared with AlN/PTFE composites. The thermal conductivity of 10.0% BN/PTFE composites is up to 0.46 W/(m·K) which is 92% higher than that of pure PTFE. The mass loss of 10.0% BN/PTFE composits in ablation process is 21.8 mg, which is 47% less than that of 3.0% AlN/PTFE composites. The ablation resistance property of nozzle composites is effectively improved. ©, 2015, Beijing University of Aeronautics and Astronautics (BUAA). All right reserved.

引用

页码：1279 / 1285

页数：6

共 15 条

[1]

Li Y.P., Zhang J.H., Experimental study of nozzle materials of high voltage circuit breaker, High Voltage Apparatus, 38, 4, pp. 19-21, (2002)

[2]

Xie T., Yang H.P., Jiang K., Numerical simulation of influence of filler content on tribological properties of Cu/PTFE composites, Acta Materiae Compositae Sinica, 32, 1, pp. 39-46, (2015)

[3]

Li Y.P., Zhou Q., Liu X., Experimental study on arc ablation resistance and dielectric property of PTFE composites, Insulating Materials, 39, 2, pp. 36-38, (2006)

[4]

Li Y.P., Geng B., Liu Z.X., Et al., Research on the electric properties of PTFE composite used in nozzle of SF6 circuit breaker, High Voltage Apparatus, 42, 2, pp. 122-124, (2006)

[5]

Yan X.Y., Yuan Y., Zhang S.R., Et al., Fabrication and thermal expansion behavior of SiO<sub>2</sub>-TiO<sub>2</sub> ceramic filled PTFE composites, Acta Materiae Compositae Sinica, 30, 6, pp. 108-113, (2013)

[6]

Gao S.Z., Wei H.Z., Li D.Y., Et al., Review on ablative materials, New Chemical Materials, 37, 2, pp. 19-21, (2009)

[7]

Wang F.Z., Qin Y., Huang Z.X., Et al., Recent studies on the modification of resin matrix ablative material by nano-materials, Materials Review A, 26, 7, pp. 93-96, (2012)

[8]

Zhu Y.L., Pei J.Y., Study on PTFE composite modified by inorganic nanometer material, China Plastics Industry, 33, 5, pp. 8-11, (2005)

[9]

Wang L.L., Tao G.L., Research on PTFE matrix composite with high thermal conductivity, China Plasitcs, 18, 4, pp. 26-28, (2004)

[10]

Ou D.B., Chen L.Z., Qu D.J., Et al., Investigation of aeroheating ablation/erosion experiment of composite materials in arc-heater, Aerospace Materials & Technology, 4, pp. 68-71, (2010)

← 1 2 →