Design and modeling of a high-speed permanent magnet synchronous generator with a retention sleeve of rotor

In this paper, the authors present a novel approach to design a high-speed permanent magnet synchronous generator (HS-PMSG) with a retention sleeve. The importance of the retention sleeve becomes conspicuous when the rotor suffers from the radial and tangential stresses derived from a high speed say 60 krpm. With respect to the mechanical property of Titanium. This material has been demonstrated that it could be a proper material for the retention sleeve. The investigations in this paper concentrated on the electromagnetic coupled with mechanical design of a 2-poles, 18-slots, 40 KW HS-PMSG which is carried out through FEM analysis using JMAG 17.1 and ABAQUS CAE and optimized through the well-known Taguchi optimization method. The obtained results assure the robust mechanical behaviour of the HS-PMSG at a rotational speed of about 60 krpm meanwhile the cogging torque, the Joule loss, and the total weight of the optimally designed HS-PMSG were reduced 44.71, 27.87, and 2.78%, respectively compared with the initial design. © 2021 Materials and Energy Research Center. All rights reserved.