Bonding Strength of Si/Yb2 Si2 O7 Duplex Coatings on SiCf /SiC Composites

被引：0
|
作者：
Zhang L. [1 ,2 ]
Zhang Y.-X. [3 ]
Niu Y.-R. [4 ]
Li Q.-L. [1 ,2 ]
Deng Y.-F. [5 ]
Zhou H.-B. [1 ,2 ]
Yao Y. [6 ]
Luo W.-D. [7 ]
机构：
[1] Science and Technology on Power Beam Processes Laboratory, AVIC Manufacturing Technology Institute, Beijing
[2] Aviation Key Laboratory of Science and Technology on Advanced Surface Engineering, Beijing
[3] AECC Shenyang Liming Aero Engine Corporation Ltd., Shenyang
[4] Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai
[5] AECC Sichuan Gas Turbine Establishment, Chengdu
[6] Institute of System Engineering, AMS, PLA, Beijing
[7] Composite Technology Center, AVIC Manufacturing Technology Institute, Beijing
来源：
Surface Technology | 2022年 / 51卷 / 03期
关键词：
bonding strength; environmental barrier coating; Si/Yb[!sub]2[!/sub]Si[!sub]2[!/sub]O[!sub]7[!/sub] duplex coating; SiC[!sub]f[!/sub]/SiC; vacuum plasma spraying;
D O I：
10.16490/j.cnki.issn.1001-3660.2022.03.021
中图分类号：
学科分类号：
摘要：
By the means of choosing suitable stretched direction of SiC fiber-reinforced SiC ceramic matrix composites (SiCf/SiC composites) and preparation technology of coatings, this work aims to obtain Si/Yb2Si2O7 duplex coatings of high bonding strength on SiCf/SiC composites. Si coating and Si/Yb2Si2O7 duplex coatings were prepared by vacuum plasma spraying (VPS) on 2.5D woven SiCf/SiC composites. The specimens were investigated by metallographic, XRD, SEM and EDS, and the bonding strength was tested by tensile test. The fracture morphology after the tensile test was observed and possible influence factors of the bonding strength were analyzed. The results show that: by using adhesion-drawing method, the tensile strength of 2.5D woven SiCf/SiC composites is (32.41±3.52) MPa. Porosities of Si coating and Yb2Si2O7 coating are 2.3% and 5.2%. The bonding strength of Si coating on SiCf/SiC is (30.48±4.43) MPa, while that of Si/Yb2Si2O7 duplex coatings (26.23±3.13) MPa. When the Si coating is stretching, parts of Si coating, weft yarn of SiC fibers and SiC ceramic matrix on the surface of SiCf/SiC composites and adhesive film are broken. When the Si/Yb2Si2O7 duplex coating is stretching, a great deal of Si coating, weft yarn of SiC fibers and SiC ceramic matrix on the surface of SiCf/SiC composites and a little of Yb2Si2O7 coating are broken. The main reasons for the high bonding strength of Si/Yb2Si2O7 duplex coatings on SiCf/SiC composites are as follows: the strength of SiCf/SiC along stretched direction is high, and the bonding strength of Si coating and SiCf/SiC is high; the vacuum plasma spraying is beneficial to decrease the defects of coatings; thermal expansion coefficient of Yb2Si2O7 is approximately with that of Si and SiCf/SiC; chemical compatibility between Si coating and Yb2Si2O7 coating is excellent. © 2022, Chongqing Wujiu Periodicals Press. All rights reserved.
引用
收藏
页码：199 / 207
页数：8
相关论文
共 28 条
  • [1] TEJERO-MARTIN D, BENNETT C, HUSSAIN T., A Review on Environmental Barrier Coatings: History, Current State of the Art and Future Developments, Journal of the European Ceramic Society, 41, 3, pp. 1747-1768, (2021)
  • [2] DEVER J A, NATHAL M V, DICARLO J A., Research on High-Temperature Aerospace Materials at NASA Glenn Research Center, Journal of Aerospace Engineering, 26, 2, pp. 500-514, (2013)
  • [3] BASU S N, SARIN V K., Thermal and Environmental Barrier Coatings for Si-Based Ceramics, pp. 469-489, (2014)
  • [4] OPILA E J, FOX D S, JACOBSON N S., Mass Spec-trometric Identification of Si-O-H(g) Species from the Reaction of Silica with Water Vapor at Atmospheric Pre-ssure, Journal of the American Ceramic Society, 80, 4, pp. 1009-1012, (1997)
  • [5] XIAO Lai-rong, NIE Yan-chun, ZHAO Xiao-jun, Et al., Finite Element Analysis of Residual Stress and Bonding Strength of MoSi<sub>2</sub> Coating, Surface Technology, 49, 8, pp. 203-209, (2020)
  • [6] FAN Qun-bo, Numerical Simulation Theory and Application of Plasma-Spraying Technology and Thermal Barrier Coatings, (2017)
  • [7] JIAO Chun-rong, JIAO Jian, CHEN Da-ming, Et al., Preparation of BSAS Powders and Its Effect on Properties of Coatings, Journal of Materials Engineering, 44, 8, pp. 51-57, (2016)
  • [8] JIAO Chun-rong, WANG Ling, YANG Jin-hua, Et al., Study on the Properties of BSAS Environmental Barrier Coatings by Atmospheric Plasma Spraying, Materials China, 35, 6, pp. 466-471, (2016)
  • [9] YANG Hai-tang, YANG Yan-ping, CAO Xue-qiang, Et al., Thermal Shock Resistance and Bonding Strength of Tri-Layer Yb<sub>2</sub>SiO<sub>5</sub>/Mullite/Si Coating on SiCf/SiC Com-posites, Ceramics International, 46, 17, pp. 27292-27298, (2020)
  • [10] ZHAI Zhao-yang, WANG Wen-jun, MEI Xue-song, Et al., Effect of the Surface Microstructure Ablated by Femto-second Laser on the Bonding Strength of EBCs for SiC/ SiC Composites, Optics Communications, 424, pp. 137-144, (2018)
123