Hot-corrosion behavior of HR3C pre-coated alkali metal sulphate in SO2 atmosphere

被引：1
|
作者：
Li P. [1 ]
Qin P. [1 ]
Zhao J. [1 ]
Li T.-J. [1 ]
Pang S.-J. [1 ]
机构：
[1] School of Materials Science and Engineering, Dalian University of Technology, Dalian, 116023, Liaoning
来源：
Li, Ping (liping69@dlut.edu.cn) | 1600年 / Beijing Institute of Aeronautical Materials (BIAM)卷 / 45期
关键词：
Alkali metal sulfate; Fireside corrosion; Hot-corrosion; Sulfation; Ultra supercritical power generation;
D O I：
10.11868/j.issn.1001-4381.2015.000295
中图分类号：
学科分类号：
摘要：
The corrosion behaviors of HR3C pre-coated alkali metal sulphate in SO2 atmosphere at different temperatures were investigated by means of XRD, SEM (EDS) and EMPA in order to discuss the corrosion resistance mechanism to SO2 of HR3C. The results show that the corrosion kinetic curves follow parabolic law. The corrosion products are mainly composed of (Fe, Cr) oxides, minor compound oxides with spinel structure as well as (Fe, Ni) sulfides. The increment in SO2 content increases significantly the oxide films in thickness, and deteriorates the adhesion to the oxide scale and matrix. In addition, the porosities in the corrosion affected zone (the interface between the oxide films and the matrix) increase and a CrS belt exits in the interface between the oxide layer and the corrosion affected zone. The analysis shows that the corrosion of HR3C in SO2 environment is resulted from the oxidation, sulfidation of the alloy, moreover, the sulfation of metallic oxides and the formation of ternary composed alkali metal sulfate as well as the dissolution of Fe in melted salt also contribute to the corrosion. © 2017, Journal of Materials Engineering. All right reserved.
引用
收藏
页码：43 / 51
页数：8
相关论文
共 15 条
  • [1] Zhang Z.X., Cheng D.N., Bian B., Et al., Study on high temperature corrosion of water-wall materials in simulated furnace atmosphere, Journal of Materials Engineering, 39, 4, pp. 14-19, (2011)
  • [2] Zhao Q.X., Zhang Z.X., Cheng D.N., Et al., High temperature corrosion of water wall materials T23 and T24 in simulated furnace atmospheres, Chinese Journal of Chemical Engineering, 20, 4, pp. 814-822, (2012)
  • [3] Zhao H., Zhang Q., Wu G.J., Et al., Study of thermal analysis kinetics for high temperature corrosion of water wall tube 20g at different density SO<sub>2</sub>, Power System Engineering, 21, 6, pp. 32-35, (2005)
  • [4] Viswanathan R., Sarver J., Tanzosh J.M., Et al., Boiler materials for ultra-supercritical coal power plants steam-side oxidation, Journal of Material Engineering and Performance, 15, 3, pp. 255-274, (2006)
  • [5] Cheng D.N., Zhang Z.X., Bian B., Et al., Experimental study on high temperature corrosion of five superheater materials for power plant boilers, Journal of Chinese Society of Power Engineering, 32, 11, pp. 891-897, (2012)
  • [6] Pang S.J., Corrosion behavior research of ultra supercritical boiler steel, (2014)
  • [7] Shi L.Q., On the possibility of a Na<sub>2</sub>SO<sub>4</sub>-Na<sub>2</sub>O eutectic melt developing on metals coated with Na<sub>2</sub>SO<sub>4</sub> deposit in oxygen/air at intermediate temperatures, Corrosion Science, 37, 8, pp. 1281-1287, (1995)
  • [8] Lin M.J., Study on high temperature corrosion mechanism and property of NiCr coatings on boiler heating surface, Journal of Shenyang Institute of Engineering (Natural Science), 7, 3, (2011)
  • [9] James P.J., Pinder L.W., Corrosion/97, (1997)
  • [10] Zhou Y.G., Features of Chinese coal used for drive and environmental protection for coal-fuel power plant boilers, Journal of Shanghai Dian-Ji University, 10, 1, (2007)
12