Microstructure and Tensile Properties of Laser Deposition Repair GH738 Superalloy

被引：0

作者：

Bian H. ^{[1
]}

Zhai Q. ^{[1
]}

Li Y. ^{[2
]}

Yang G. ^{[1
]}

Wang W. ^{[1
]}

机构：

[1] Key Laboratory of Fundamental Science for National Defence of Aeronautical Digital Manufacturing Process, Shenyang Aerospace University, Shenyang, 110136, Liaoning

[2] Welding Research Institute, Shenyang Liming Aero-Engine Co., Ltd., Aero Engine Corporation of China, Shenyang, 110043, Liaoning

来源：

| 1600年 / Science Press卷 / 44期

关键词：

GH738; superalloy; Laser deposition repair; Laser technique; Microstructure; Tensile property;

D O I：

10.3788/CJL201744.1002003

中图分类号：

学科分类号：

摘要：

The GH738 nickel-based superalloy through-groove sample is repaired by laser deposition, and the microstructure and room temperature tensile properties of the repaired sample are analyzed. The results show that the microstructure of repair zone presents typical characteristics of columnar dendrite with epitaxial growth, and the dendrites are perpendicular to the substrate and tend to grow along the deposition height direction through multiple layers. The dendritic orientation in the center of the repair area shows a large deflection. No γ' phase is found in the repair area, the content of carbide in the area is less, the M23C6 type carbides rich in Cr and Co mainly exist in the dendrite stem, and a few cubic MC carbides with relatively larger size and higher contents of Ti and Mo exist among the dendrites. Compared to the substrate, the size of γ' phase in the heat affected zone obviously increases, the size of partial γ' phase exceeds 200 nm and the average distance between them increases obviously. The content of carbide in the heat affected zone reduces, and partial carbides decompose. The room temperature tensile strength and elongation of the laser deposition repair sample is 78.2% and 69.2% of those of the forging, respectively. © 2017, Chinese Lasers Press. All right reserved.

引用

共 14 条

[1]

Shi Y., Chen Z., Zhang Q., Et al., Cracking behavior of Inconel 738 alloy on Ni-base superalloy surface by laser cladding, Heat Treatment of Metals, 36, 3, pp. 72-75, (2011)

[2]

Xue L., Huang W., Chen J., Et al., Application of laser forming repair technology on the aerial castings, Foundry Technology, 29, 3, pp. 391-393, (2008)

[3]

Petrat T., Graf B., Gumenyuk A., Et al., Laser metal deposition as repair technology for a gas turbine burner made of Inconel 718, Physics Procedia, 83, pp. 761-768, (2016)

[4]

Razavi R.S., Laser beam welding of Waspaloy: characterization and corrosion behavior evaluation, Optics & Laser Technology, 82, pp. 113-120, (2016)

[5]

Lu P., Liu J., Xue L., Et al., Microstructure and cracking behavior of K418 superalloy by laser forming repairing, Rare Metal Materials and Engineering, 41, 2, pp. 315-319, (2012)

[6]

Bian H., Dong W., Wang S., Et al., Experimental study on laser deposition repair of surface damage of GH4169 thin-walled components, Chinese J Lasers, 43, 10, (2016)

[7]

Ming X., Chen J., Tan H., Et al., Research on persistent fracture mechanism of laser forming repaired GH4169 superalloy, Chinese J Lasers, 42, 4, (2015)

[8]

Zhao J., Cheng C., Xie D., Et al., High-temperature tensile property of GH4169 nickel-based superalloys by laser repair, Chinese J Lasers, 43, 8, (2016)

[9]

Yao Z., Dong J., Chen X., Et al., Gamma prime phase evolution during long-time exposure for GH738 superalloy, Transactions of Materials and Heat Treatment, 34, 1, pp. 31-37, (2013)

[10]

Hussein N.I.S., Segal J., McCartney D.G., Et al., Microstructure formation in Waspaloy multilayer builds following direct metal deposition with laser and wire, Materials Science and Engineering A, 497, 1-2, pp. 260-269, (2008)

← 1 2 →