Preparation of AC/X-G adsorbent and CH4/N2 adsorption separation performance

被引：0

作者：

Zhang D. ^{[1
]}

Cheng W. ^{[1
]}

Zhang M. ^{[1
]}

Cui X. ^{[2
]}

Ma J. ^{[2
]}

Li R. ^{[1
,2
]}

机构：

[1] College of Chemistry and Chemical Engineering, Taiyuan University of Technology, Taiyuan, 030024, Shanxi

[2] Institute of Special Chemicals, Taiyuan University of Technology, Taiyuan, 030024, Shanxi

来源：

Huagong Xuebao/CIESC Journal | 2016年 / 67卷 / 06期

基金：

中国国家自然科学基金;

关键词：

Adsorbent; Adsorption; Carbon deposition; Glucose; Separation;

D O I：

10.11949/j.issn.0438-1157.20151606

中图分类号：

学科分类号：

摘要：

The 13X/activated carbon composite was treated by 0.2 g·ml-1 glucose solution for carbon deposition. The effect of deposition times on the pore structure, surface properties and separation performance of CH4/N2 were studied. The crystalline, pore structure and surface properties of the samples were investigated by X-ray diffraction (XRD), N2 adsorption-desorption isotherms at 77 K, scanning electron microscopy (SEM), CO2-TPD and Fourier transform infrared spectrum (FT-IR). The adsorption isotherms of CH4 and N2 were tested at 298 K and 100 kPa, and compared with the adsorption separation properties of carbon materials and 13X zeolite reported in the literatures. The experimental results showed that the relative content of X zeolite, the micropore surface area and the micropore volume of AC/X-G were gradually decreased with the increase of deposition times. The surface of samples was covered by carbon membrane, which led to decrease of the alkaline functional groups but increase of containing C-O groups. The adsorption capacities of CH4 and N2 decreased, while the adsorption separation coefficient was improved. After third deposition, the adsorption separation coefficient of CH4/N2 reached 3.0. The oxygen-containing functional groups on the surface of AC/X-G were beneficial to improve the separation performance of CH4/N2. © All Right Reserved.

引用

页码：2386 / 2392

页数：6

共 26 条

[1] Yang H.W., Yin C.B., Jiang B., Et al., Optimization and analysis of a VPSA process for N2/CH4 separation, Separation and Purification Technology, 134, pp. 232-240, (2014)
[2] Lokhandwala K.A., Pinnau I., He Z.J., Et al., Membrane separation of nitrogen from natural gas: a case study from membrane synthesis to commercial deployment, Journal of Membrane Science, 346, 2, pp. 270-279, (2010)
[3] Buonomenna M.G., Golemme G., Tone C.M., Et al., Nanostructured poly(styrene-b-butadiene-b-styrene) (SBS) membranes for the separation of nitrogen from natural gas, Advanced Functional Materials, 22, 8, pp. 1759-1767, (2012)
[4] Ruan X.H., He G.H., Xiao W., Et al., Design and optimization of membrane-based system for bio-methane purification, CIESC Journal, 65, 5, pp. 1688-1695, (2014)
[5] Zhong D.L., Lu Y.Y., Sun D.J., Et al., Performance evaluation of methane separation from coal mine gas by gas hydrate formation in a stirred reactor and in a fixed bed of silica sand, Fuel, 143, pp. 568-594, (2015)
[6] Fan Q.H., Li H.Y., Yin Q.S., Et al., Liquefaction technology on low-concentration CBM and its application, Natur. Gas Ind., 28, 3, pp. 117-120, (2008)
[7] Brian R.S., Process for removing nitrogen from natural gas
[8] Friesen D.T., Babcock W.C., Edlund D.J., Et al., Liquid of absorbent solutions for separating nitrogen from natural gas
[9] Warmuzinski K., Sodzawiczny W., Effect of adsorption pressure on methane purity during PSA separations of CH4/N2 mixtures, Chemical Engineering and Processing, 38, pp. 55-60, (1999)
[10] Gu M., Zhang B., Qi Z.D., Et al., Effects of pore structure of granular activated carbons on CH4 enrichment from CH4/N2 by vacuum pressure swing adsorption, Separation and Purification Technology, 146, pp. 213-218, (2015)

← 1 2 3 →