A Reliability Analysis Method Based on Relative Error Estimation of Failure Probability

被引：1

作者：

Zhang Y.-B. ^{[1
]}

Sun Z.-L. ^{[1
]}

Yan Y.-T. ^{[1
]}

Wang J. ^{[1
]}

机构：

[1] School of Mechanical Engineering & Automation, Northeastern University, Shenyang

来源：

Dongbei Daxue Xuebao/Journal of Northeastern University | 2020年 / 41卷 / 02期

关键词：

Adaptive design of experiments; Failure probability; Kriging model; Relative error; Structural reliability analysis;

D O I：

10.12068/j.issn.1005-3026.2020.02.014

中图分类号：

学科分类号：

摘要：

To analyze the reliability of complex mechanical structures more efficiently, an innovative adaptive analysis method is proposed based on the Kriging model and the relative error estimation of failure probability. The range of the number of actual failure samples in the region where the signs of samples are uncertain is derived using the normal distribution that approximates to the Poisson binomial distribution. The lower limit of the range is redefined by introducing a scale factor to ensure that the number of actual failure samples can accurately fall within the range. Then, a more accurate estimation of relative error of failure probability is provided. The adaptive design of experiments is implemented by the learning function U. Two examples are employed to verify the accuracy, generality and efficiency of the presented relative error estimation of failure probability and the adaptive analysis method. The results indicate that the as-introduced approach can not only accurately estimate the relative error of failure probability, but also significantly decrease the calls to performance function. © 2020, Editorial Department of Journal of Northeastern University. All right reserved.

引用

页码：229 / 233and240

共 14 条

[1]

Roussouly N., Petitjean F., Salaun M., A new adaptive response surface method for reliability analysis, Probabilistic Engineering Mechanics, 32, pp. 103-115, (2013)

[2]

Golzari A., Sefat M.H., Jamshidi S., Development of an adaptive surrogate model for production optimization, Journal of Petroleum Science & Engineering, 133, pp. 677-688, (2015)

[3]

Pan Q., Dias D., An efficient reliability method combining adaptive support vector machine and Monte Carlo simulation, Structural Safety, 67, pp. 85-95, (2017)

[4]

Sun Z., Wang J., Li R., Et al., LIF: a new Kriging based learning function and its application to structural reliability analysis, Reliability Engineering & System Safety, 157, pp. 152-165, (2017)

[5]

Wang J., Sun Z., The stepwise accuracy-improvement strategy based on the Kriging model for structural reliability analysis, Structural & Multidisciplinary Optimization, 58, 2, pp. 595-612, (2018)

[6]

Liu K., Li X.-L., Wang J., An analysis method of mechanical structural reliability based on the Kriging model, Journal of Northeastern University(Natural Science), 38, 7, pp. 1002-1006, (2017)

[7]

Zhang X., Wang L., Sorensen J.D., REIF: a novel active-learning function toward adaptive Kriging surrogate models for structural reliability analysis, Reliability Engineering & System Safety, 185, pp. 440-454, (2019)

[8]

Bichon B.J., Eldred M.S., Swiler L.P., Et al., Efficient global reliability analysis for nonlinear implicit performance functions, AIAA Journal, 46, 10, pp. 2459-2468, (2008)

[9]

Echard B., Gayton N., Lemaire M., AK-MCS: an active learning reliability method combining Kriging and Monte Carlo simulation, Structural Safety, 33, 2, pp. 145-154, (2011)

[10]

Wen Z., Pei H., Liu H., Et al., A sequential Kriging reliability analysis method with characteristics of adaptive sampling regions and parallelizability, Reliability Engineering & System Safety, 153, pp. 170-179, (2016)

← 1 2 →