Research on Variable Diameter Design and Target Interaction Optimization of Turret Disassembling Platform

被引:0
|
作者
Yan P.-C. [1 ]
Shao S. [1 ,2 ]
Sun J.-S. [1 ]
Zhang L.-W. [1 ]
机构
[1] Special Service Institute, Shijiazhuang, 050000, Hebei
[2] Northwest Institute of Nuclear Technology, Xi'an, 710024, Shaanxi
来源
Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology | 2018年 / 38卷 / 05期
关键词
Disassembling platform; Size optimization; Target interactive optimization; Topology optimization; Variable diameter design;
D O I
10.15918/j.tbit1001-0645.2018.05.004
中图分类号
学科分类号
摘要
In order to solve the problems of poor universal and miscellaneous types of existing various self-propelled gun turret assembling platforms, a variable diameter turret assembling platform was designed based on the analysis of their size requirements. To realize a lightweight design and improve the stiffness and strength of the platform, a method of target interaction optimization design based on topology optimization and size optimization was proposed. Firstly, setting the minimum quality of the tray, causing the platform damaged easily, as the optimal target, the maximum allowable displacement and the allowable stress as constraint conditions, the cell density as design variables, the topology optimization of the tray was carried out. Then the topology optimization results were regularized, and setting the improvement of stiffness and strength as the optimization target, no increasing quality as constraint conditions, the important size parameters as design variables, the size optimization of the tray was implemented. The results show that, the quality can be reduced from 1 421 kg to 1 032 kg after optimization, the structural stiffness and strength are greatly improved. The effectiveness of the optimized results is verified by tooling test. © 2018, Editorial Department of Transaction of Beijing Institute of Technology. All right reserved.
引用
收藏
页码:462 / 468
页数:6
相关论文
共 7 条
  • [1] Liu Z., Zhang T., Wang P., Et al., Topology optimization design for frame of infrared seeker's stabilization platform, Infrared and Laser Engineering, 45, 2, (2016)
  • [2] Rui Q., Wang H., Zhang L., Research on topology optimization of power train bracket under multiple loads, Acta Armamentarii, 31, 6, pp. 782-786, (2010)
  • [3] Zhang M., Liu W., Li C., Et al., Optimization-driven design method of loading gear structure, Acta Aeronautica et Astronautica Sinica, 36, 3, pp. 857-864, (2015)
  • [4] Chen J., Yang G., Ge J., Multi-case structure optimization design for top carriage of a gun based on orthogonal test, Journal of Ballistics, 27, 1, pp. 92-96, (2015)
  • [5] Jia W., Hao Z., Xu H., Light-weight design of single cylinder engine block based on structure optimization, Journal of Zhejiang University: Engineering Science, 42, 2, pp. 224-228, (2008)
  • [6] Rober M., Todtermuschke M., Multiobjective topology optimization of truss structures for assembly devices using intelligent swarm techniques, Procedia CIRP, 23, pp. 241-245, (2014)
  • [7] Liu R., Hao Z., Zheng X., Et al., The fluid-structure interaction influence on the vibro-acoustic characteristics of the oil pan, Tansactions of Beijing Institute of Technology, 37, 1, pp. 37-41, (2017)