A numerical study on an impact deformation behavior of TRIP steel

被引：0

作者：

Iwamoto, Takeshi ^{[1
]}

Cherkaoui, Mohammed ^{[2
]}

Sawa, Toshiyuki ^{[2
]}

机构：

[1] Graduate School of Engineering, Hiroshima University, Hiroshima, 739 8527, 1-4-1 Kagamiyama, Higashi-Hiroshima

[2] George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, N. W. Atlanta. GA, 30332-0405

来源：

Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A | 2009年 / 75卷 / 752期

关键词：

Computational mechanics; Coupling problem; Finite element method; Impact deformation; Phase transformation; Trip steel;

D O I：

10.1299/kikaia.75.404

中图分类号：

学科分类号：

摘要：

Due to a strain-induced martensitic transformation (SIMT), a strength, a ductility and a toughness of the TRIP steel are enhanced. Recently, a low-alloyed high strength steel based on the TRIP steel is under development and its application to an impact absorption member is being investigated. Therefore, an evaluation of an energy absorption characteristic of the TRIP steels is quite essential. An experimental approach provides us the SIMT behavior under only static deformation since it is difficult to capture a moment of the phase evolution and temperature rise for the impact deformation. Thus, a computational approach with an appropriate constitutive model for TRIP steel can be powerful for its evaluation. Here, the impact compressive deformation behavior of TRIP steel is experimentally studied by the split Hopkinson pressure bar (SHPB) method at room temperature. Then, a finite element equation with the constitutive model for the TRIP steel proposed in the past is derived from a rate form of the principle of virtual work based on an implicit time integration scheme. After the results between the computation and the experiment for an impact compression are compared to confirm an validity of the computation, an impact deformation behavior under tensile deformation at a various temperature are evaluated.

引用

页码：404 / 409

页数：5

共 8 条

[1]

Tamura I., On the TRIP steel, Journal of the Iron & Steel Institute of Japan, 56, 3, pp. 429-445, (1970)

[2]

Kunishige K., Recent progress and prospect of high strength sheet steel for automotive use, Journal of the Society of Materials Science, Japan, 50, 1, pp. 47-54, (2001)

[3]

Hayashi T., Tanaka K., Impact Engineering, (1988)

[4]

Ishikawa K., Tanimura S., Strain rate sensitivity of flow stress at low temperatures in 304N stainless steel, International Journal of Plasticity, 8, 8, pp. 947-958, (1992)

[5]

Kojima K., Mizui N., Yamamoto S., Pukui K., Effect of strain rate and deformation condition on characterisitcs of tensile test in a sheet steel for automotive use, Proceedings of the 48th. Meeting of Japanese Union for Plastastic Work, pp. 249-250, (1997)

[6]

Date H., Putakawa M., Ishikura S., Strain rate dependence of electric resistivity of stainless steel, Proceedings of Annual Meeting of the JSME, 1, 1 -1, pp. 363-364, (2001)

[7]

Iwamoto T., Tsuta T., Tomita Y., Deformation-mode-dependenct constitutive modeling of TRIP steels, Journal of the Japan Society for Technology of Plasticity, 39, 454, pp. 1144-1149, (1998)

[8]

Tomita Y., Pujimoto T., Dynamic flow localization of plane-strain blocks under compression, Proceedings of Plasticity '95, pp. 401-404, (1995)

← 1 →